Support for Microchip UNI/O single wire interface

Please add any feature requests for Flowcode version 7 here

Moderator: Benj

Post Reply
derekgore
Posts: 10
Joined: Sat Jun 03, 2017 2:35 am
Has thanked: 5 times
Been thanked: 4 times
Contact:

Support for Microchip UNI/O single wire interface

Post by derekgore »

I'm wondering if Matrix has considered support for the Microchip UNI/O single wire interface?

These memory chips are becoming quite popular and are as cheap as standard I2C memory & are available in several different packages including 3 pin SOT-23 & through hole (for hobbyists) TO-92.

The data speeds are user variable from 10 to 100kHz & they are designed for >1 million write/erase cycles (which is great when wanting to store kWH generated by solar systems/Battery Banks etc).

Datasheet:
http://ww1.microchip.com/downloads/en/D ... 22067J.pdf

Pricing:
https://www.digikey.com/products/en?keywords=11AA010

Microchip's comparison to other communication protocols:
http://www.microchip.com/stellent/group ... 542952.pdf

And further documentation here:
http://www.microchip.com/wwwproducts/en/11LC010

Support for the Microchip UNI/O single wire interface could be added to the Comms Pack A.

User avatar
Benj
Matrix Staff
Posts: 15312
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4803 times
Been thanked: 4314 times
Contact:

Re: Support for Microchip UNI/O single wire interface

Post by Benj »

Thanks for letting us know, they look interesting.

I'll get them on the to do list.

orbelsevoyan
Flowcode V4 User
Posts: 10
Joined: Sat Jan 07, 2012 7:26 pm
Has thanked: 1 time
Been thanked: 1 time
Contact:

Re: Support for Microchip UNI/O single wire interface

Post by orbelsevoyan »

Hello Ben,

Did you added UNI/O support in Flowcode?

Thanks Orbel

Post Reply