FC7.3 compiele to hex error's
Moderator: Benj
-
- Valued Contributor
- Posts: 654
- Joined: Fri Aug 19, 2016 2:09 pm
- Location: switzerland
- Has thanked: 182 times
- Been thanked: 179 times
- Contact:
FC7.3 compiele to hex error's
Hi Ben
Two of my PIC32 program are ok on my computer with FC7.2
But not working on my computer with FC7.3
Two of my PIC32 program are ok on my computer with FC7.2
But not working on my computer with FC7.3
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: FC7.3 compiele to hex error's
Hello,
Are you getting any compiler errors or warnings when compiling in 7.3?
Can you say what is not working, is it something specific or is nothing at all working?
Are you getting any compiler errors or warnings when compiling in 7.3?
Can you say what is not working, is it something specific or is nothing at all working?
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Valued Contributor
- Posts: 654
- Joined: Fri Aug 19, 2016 2:09 pm
- Location: switzerland
- Has thanked: 182 times
- Been thanked: 179 times
- Contact:
Re: FC7.3 compiele to hex error's
I can not compile to hex an empty PIC32 program.
But a STM32 is working
But a STM32 is working
-
- Valued Contributor
- Posts: 654
- Joined: Fri Aug 19, 2016 2:09 pm
- Location: switzerland
- Has thanked: 182 times
- Been thanked: 179 times
- Contact:
Re: FC7.3 compiele to hex error's
An empty progam I can compile now to hex if I choose default compiler for the platform. But my program still has error.
I exportet the compiler option from 7.2 computer and imported in computer with FC3. Still error
I exportet the compiler option from 7.2 computer and imported in computer with FC3. Still error
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: FC7.3 compiele to hex error's
Hi Stefan,
What error are you getting specifically?An empty progam I can compile now to hex if I choose default compiler for the platform. But my program still has error.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Valued Contributor
- Posts: 654
- Joined: Fri Aug 19, 2016 2:09 pm
- Location: switzerland
- Has thanked: 182 times
- Been thanked: 179 times
- Contact:
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: FC7.3 compiele to hex error's
Hello Stefan,
The problem might be the # symbols in the file path. The C preprocessor treats this as a special "do something" character and so could be getting very confused.
The problem might be the # symbols in the file path. The C preprocessor treats this as a special "do something" character and so could be getting very confused.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Valued Contributor
- Posts: 654
- Joined: Fri Aug 19, 2016 2:09 pm
- Location: switzerland
- Has thanked: 182 times
- Been thanked: 179 times
- Contact:
Re: FC7.3 compiele to hex error's
Hi Ben
I removed the # but still the error.
All my computer use one or more of# in the path of FC and FC7 is working.
I will try to reduce it anyway.
I removed the # but still the error.
All my computer use one or more of# in the path of FC and FC7 is working.
I will try to reduce it anyway.
- STibor
- Posts: 263
- Joined: Fri Dec 16, 2011 3:20 pm
- Has thanked: 116 times
- Been thanked: 113 times
- Contact:
Re: FC7.3 compiele to hex error's
Hello,
I get this error message for all types of controllers:
Do not compiling hex to any controller.
Flowcode7.3.0.5
Target folder: C:\flow\ULTRAS~1
Source name: C:\flow\ultrasonic\Flowcode1.fcfx
Title:
Description:
Device: AVR.ATMEGA.ATMEGA328P
Generated by: Flowcode v7.3.0.5
Date: Monday, January 15, 2018 07:51:18
Users: 1
Registered to: *******
Licence key: *******
http://www.matrixtsl.com
Launching the compiler...
C:\Program Files (x86)\Flowcode 7\compilers\avr\batchfiles\avra.bat atmega328p "C:\flow\ULTRAS~1\Flowcode1.elf" "C:\flow\ULTRAS~1\Flowcode1.c" "C:\flow\ULTRAS~1\Flowcode1.lst"
Launching compiler...
ERROR: Can not launch process: A rendszer nem tal�lja a megadott f�jlt.
Completed compilation, return = 255
C:\Program Files (x86)\Flowcode 7\compilers\avr\batchfiles\avra.bat reported error code 255
FINISHED
Win10 64bit
I get this error message for all types of controllers:
Do not compiling hex to any controller.
Flowcode7.3.0.5
Target folder: C:\flow\ULTRAS~1
Source name: C:\flow\ultrasonic\Flowcode1.fcfx
Title:
Description:
Device: AVR.ATMEGA.ATMEGA328P
Generated by: Flowcode v7.3.0.5
Date: Monday, January 15, 2018 07:51:18
Users: 1
Registered to: *******
Licence key: *******
http://www.matrixtsl.com
Launching the compiler...
C:\Program Files (x86)\Flowcode 7\compilers\avr\batchfiles\avra.bat atmega328p "C:\flow\ULTRAS~1\Flowcode1.elf" "C:\flow\ULTRAS~1\Flowcode1.c" "C:\flow\ULTRAS~1\Flowcode1.lst"
Launching compiler...
ERROR: Can not launch process: A rendszer nem tal�lja a megadott f�jlt.
Completed compilation, return = 255
C:\Program Files (x86)\Flowcode 7\compilers\avr\batchfiles\avra.bat reported error code 255
FINISHED
Win10 64bit
- Attachments
-
- warning.jpg (58.98 KiB) Viewed 10630 times
-
- Valued Contributor
- Posts: 2045
- Joined: Wed Aug 27, 2008 10:31 pm
- Location: Netherlands
- Has thanked: 553 times
- Been thanked: 1081 times
- Contact:
Re: FC7.3 compiele to hex error's
Have you recently updated your Windows 10 installation or your Virus scanner? (Perhaps for the Meltdown/Spectre issues?)
“Integrity is doing the right thing, even when no one is watching.”
― C.S. Lewis
― C.S. Lewis
- STibor
- Posts: 263
- Joined: Fri Dec 16, 2011 3:20 pm
- Has thanked: 116 times
- Been thanked: 113 times
- Contact:
Re: FC7.3 compiele to hex error's
Windows is up to date. The antivirus is Eset Nod32.kersing wrote:Have you recently updated your Windows 10 installation or your Virus scanner? (Perhaps for the Meltdown/Spectre issues?)
I turned off the antivirus, it has no effect on the operation.
I think I'm going to reinstall Flow7.2.
-
- Valued Contributor
- Posts: 654
- Joined: Fri Aug 19, 2016 2:09 pm
- Location: switzerland
- Has thanked: 182 times
- Been thanked: 179 times
- Contact:
Re: FC7.3 compiele to hex error's
Hi Ben
I tested my program on a third computer with FC7.3 and win 10 and it's ok.
Later I will test what's going on at the other computer.(it's a win7)
I tested my program on a third computer with FC7.3 and win 10 and it's ok.
Later I will test what's going on at the other computer.(it's a win7)
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: FC7.3 compiele to hex error's
STibor - This FAQ may be of help to you. Is the compile problem just for AVR?
http://www.matrixtsl.com/faq/index.php? ... artlang=en
Stefan - I'm not getting the same compile errors as you so not sure what's going wrong there. I'll have a bit more of an investigation.
It looks like this is a bit of a clue.
http://www.matrixtsl.com/faq/index.php? ... artlang=en
Stefan - I'm not getting the same compile errors as you so not sure what's going wrong there. I'll have a bit more of an investigation.
It looks like this is a bit of a clue.
If you have a look at the Flowcode generated C file, around line 362 then there could be a pin that isn't being defined correctly, e.g. like my SS pin is just a tris with no letter after e.g. trisa. Luckily this is not currently used so we can ignore this one.In file included from C:\C#_SOU~1\_#FC\TESTPR~1\CRASH_~1\Flowcode_Emg_2018_main_crashtest.c:89:0:
C:\Program Files (x86)\Flowcode 7\CAL\PIC32BIT\PIC32BIT_CAL_SPI.c: In function 'FC_CAL_SPI_Master_Init_2':
C:\C#_SOU~1\_#FC\TESTPR~1\CRASH_~1\Flowcode_Emg_2018_main_crashtest.c:167:28: error: 'tris' undeclared (first use in this function)
#define MX_SPI_MISO_TRIS_2 tris
I don't seem to have "MX_SPI_MISO_TRIS_2" defined in the project you attached.#define MX_SPI_SS_TRIS_1 tris
#define MX_SPI_MISO_PORT_1 portd
#define MX_SPI_SCK_TRIS_1 trisg
#define MX_SPI_SCK_PIN_1 (6)
#define MX_SPI_MOSI_TRIS_1 trisf
#define MX_SPI_BMODE_1 (1)
#define MX_SPI_MISO_TRIS_1 trisd
#define MX_SPI_MOSI_PIN_1 (0)
#define MX_SPI_MISO_PIN_1 (11)
#define MX_SPI_SS_PIN_1 (0)
#define MX_SPI_PR_SCALE_1 (0)
#define MX_SPI_SS_PORT_1 port
#define MX_SPI_SCK_PORT_1 portg
#define MX_SPI_MOSI_PORT_1 portf
#define MX_SPI_CHANNEL_1 (2)
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
- STibor
- Posts: 263
- Joined: Fri Dec 16, 2011 3:20 pm
- Has thanked: 116 times
- Been thanked: 113 times
- Contact:
Re: FC7.3 compiele to hex error's
All controllers were defective.
Unfortunately, this method did not work well.He was able to fix it quite complicated.
1. Usual installation (before Flowcode uninstall and delete folder).
2. Deleted Installed Program (Delete, No Uninstall)
3.3. From the old (full) backup I copied the old backup to the Flowcode installation folder. (then v7.2 was already working)
4. Uninstall and delete a folder.
5. Install v7.3.0.5It's working now.
The UART data injector still does not recognize the COM port.
Unfortunately, this method did not work well.He was able to fix it quite complicated.
1. Usual installation (before Flowcode uninstall and delete folder).
2. Deleted Installed Program (Delete, No Uninstall)
3.3. From the old (full) backup I copied the old backup to the Flowcode installation folder. (then v7.2 was already working)
4. Uninstall and delete a folder.
5. Install v7.3.0.5It's working now.
The UART data injector still does not recognize the COM port.
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: FC7.3 compiele to hex error's
Hello,
Glad you are able to compile again correctly now.
Regarding missing COM ports have you seen this topic.
viewtopic.php?f=68&t=19686
Glad you are able to compile again correctly now.
Regarding missing COM ports have you seen this topic.
viewtopic.php?f=68&t=19686
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Valued Contributor
- Posts: 654
- Joined: Fri Aug 19, 2016 2:09 pm
- Location: switzerland
- Has thanked: 182 times
- Been thanked: 179 times
- Contact:
Re: FC7.3 compiele to hex error's
Hi Ben
I tried to solve the error's.
The compilere shows me error in a Icon what I disabled.
Do you now why?
I tried to solve the error's.
The compilere shows me error in a Icon what I disabled.
Do you now why?
-
- Posts: 47
- Joined: Sun Apr 05, 2009 2:39 pm
- Been thanked: 1 time
- Contact:
Re: FC7.3 compilador ERROR
Hola Benj.
After installing Flowcode 7.3.0.6, an incomprehensible error occurred during compilation. STM32F407VET6.
On Flowcode 7.2, this error was not. Tell me what the problem is.
Iniciando el compilador…
C:\Program Files (x86)\Flowcode 7\compilers\STARM\batch\stm32comp.bat "REGULADOR-82_03" "F:\##PROE~1\#$RED-~1\STM32F~4\" "32F407xx" "F4" "stm32f_ccm64.ld" "8000000" "512K" "128K"
ERROR: Can not launch process: ?? ??????? ????? ????????? ????.
C:\Program Files (x86)\Flowcode 7\compilers\STARM\batch\stm32comp.bat notificado código de error -1
Thank you
After installing Flowcode 7.3.0.6, an incomprehensible error occurred during compilation. STM32F407VET6.
On Flowcode 7.2, this error was not. Tell me what the problem is.
Iniciando el compilador…
C:\Program Files (x86)\Flowcode 7\compilers\STARM\batch\stm32comp.bat "REGULADOR-82_03" "F:\##PROE~1\#$RED-~1\STM32F~4\" "32F407xx" "F4" "stm32f_ccm64.ld" "8000000" "512K" "128K"
ERROR: Can not launch process: ?? ??????? ????? ????????? ????.
C:\Program Files (x86)\Flowcode 7\compilers\STARM\batch\stm32comp.bat notificado código de error -1
Thank you
- LeighM
- Matrix Staff
- Posts: 2178
- Joined: Tue Jan 17, 2012 10:07 am
- Has thanked: 481 times
- Been thanked: 699 times
- Contact:
Re: FC7.3 compiele to hex error's
Could you try moving your project into a directory path that only contains ASCII alpha-numeric characters?
Just to see if the problem is with the path.
Thanks
Just to see if the problem is with the path.
Thanks
-
- Posts: 47
- Joined: Sun Apr 05, 2009 2:39 pm
- Been thanked: 1 time
- Contact:
Re: FC7.3 compiele to hex error's
Hola LeighM.
Installed version 7.2.1.4, a directory with only letters, the same problem, maybe it's a problem with Windows.
Recently reinstalled Windows 7x64.
Target folder: F:\PROECTOS\RED-REGULADOR FASE\STM32F~4
Source name: F:\PROECTOS\RED-REGULADOR FASE\STM32F407VET6\REGULADOR-82_03.fcfx
Device: ARM.F4.32F407VE
Generated by: Flowcode v7.2.1.4
Date: Monday, January 29, 2018 18:59:39
Users: 1
Registered to: volodymyr0604
Licence key: 4C3QV6
http://www.matrixtsl.com
Iniciando el compilador…
C:\Program Files (x86)\Flowcode 7\compilers\STARM\batch\stm32comp.bat "REGULADOR-82_03" "F:\PROECTOS\RED-REGULADOR FASE\STM32F~4\" "32F407xx" "F4" "stm32f_ccm64.ld" "8000000" "512K" "128K"
ERROR: Can not launch process: ?? ??????? ????? ????????? ????.
C:\Program Files (x86)\Flowcode 7\compilers\STARM\batch\stm32comp.bat notificado código de error -1
FINALIZADO
Thanks.
Installed version 7.2.1.4, a directory with only letters, the same problem, maybe it's a problem with Windows.
Recently reinstalled Windows 7x64.
Target folder: F:\PROECTOS\RED-REGULADOR FASE\STM32F~4
Source name: F:\PROECTOS\RED-REGULADOR FASE\STM32F407VET6\REGULADOR-82_03.fcfx
Device: ARM.F4.32F407VE
Generated by: Flowcode v7.2.1.4
Date: Monday, January 29, 2018 18:59:39
Users: 1
Registered to: volodymyr0604
Licence key: 4C3QV6
http://www.matrixtsl.com
Iniciando el compilador…
C:\Program Files (x86)\Flowcode 7\compilers\STARM\batch\stm32comp.bat "REGULADOR-82_03" "F:\PROECTOS\RED-REGULADOR FASE\STM32F~4\" "32F407xx" "F4" "stm32f_ccm64.ld" "8000000" "512K" "128K"
ERROR: Can not launch process: ?? ??????? ????? ????????? ????.
C:\Program Files (x86)\Flowcode 7\compilers\STARM\batch\stm32comp.bat notificado código de error -1
FINALIZADO
Thanks.
- LeighM
- Matrix Staff
- Posts: 2178
- Joined: Tue Jan 17, 2012 10:07 am
- Has thanked: 481 times
- Been thanked: 699 times
- Contact:
Re: FC7.3 compiele to hex error's
Could you try this ...
http://www.matrixtsl.com/faq/index.php? ... at=1&id=69
http://www.matrixtsl.com/faq/index.php? ... at=1&id=69
- STibor
- Posts: 263
- Joined: Fri Dec 16, 2011 3:20 pm
- Has thanked: 116 times
- Been thanked: 113 times
- Contact:
Re: FC7.3 compiele to hex error's
Hello!Benj wrote:Hello,
Glad you are able to compile again correctly now.
Regarding missing COM ports have you seen this topic.
viewtopic.php?f=68&t=19686
I identified the problem.
Windows UAC's function is crazy.
Even though it turned off, it still turned on and disallowed administrator access to the files.
I have banned UAC manually, and since then it has been working perfectly.
-
- Posts: 47
- Joined: Sun Apr 05, 2009 2:39 pm
- Been thanked: 1 time
- Contact:
Re: FC7.3 compiele to hex error's
Hola.
Flowkode 7.3.The same error when compiled, account control disabled
С++ 2015 installed. Tell me what could be the problem.
Iniciando el compilador…
C:\Program Files (x86)\Flowcode 7\compilers\STARM\batch\stm32comp.bat "REGULADOR_83" "F:\PROECTOS\RED-REGULADOR FASE\STM32F~4\" "32F407xx" "F4" "stm32f_ccm64.ld" "8000000" "512K" "128K"
ERROR: Can not launch process: ?? ??????? ????? ????????? ????.
C:\Program Files (x86)\Flowcode 7\compilers\STARM\batch\stm32comp.bat notificado código de error -1
FINALIZADO
Flowkode 7.3.The same error when compiled, account control disabled
С++ 2015 installed. Tell me what could be the problem.
Iniciando el compilador…
C:\Program Files (x86)\Flowcode 7\compilers\STARM\batch\stm32comp.bat "REGULADOR_83" "F:\PROECTOS\RED-REGULADOR FASE\STM32F~4\" "32F407xx" "F4" "stm32f_ccm64.ld" "8000000" "512K" "128K"
ERROR: Can not launch process: ?? ??????? ????? ????????? ????.
C:\Program Files (x86)\Flowcode 7\compilers\STARM\batch\stm32comp.bat notificado código de error -1
FINALIZADO
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: FC7.3 compiele to hex error's
Hello,
Could be a short path name problem, this seems to affect the GCC based compilers (AVR / ARM) more than the PIC compilers.
http://www.matrixtsl.com/faq/index.php? ... artlang=en
Could be a short path name problem, this seems to affect the GCC based compilers (AVR / ARM) more than the PIC compilers.
http://www.matrixtsl.com/faq/index.php? ... artlang=en
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Posts: 47
- Joined: Sun Apr 05, 2009 2:39 pm
- Been thanked: 1 time
- Contact:
Re: FC7.3 compiele to hex error's
Hello Benj.
I installed FC 7.3.0.5, I2C error occurred.
FC 7.2.1.4 + Patch FC 7.3.0.5 the same error.
I2C is installed in the software mode 400 kbps.
Tell me what the problem is.
Thank you.
=============================
Generated by: Flowcode v7.3.0.5
Date: Thursday, February 15, 2018 19:21:21
Iniciando el compilador…
C:\Program Files (x86)\Flowcode 7\compilers\STARM\batch\stm32comp.bat "REGULADOR_83_01" "F:\PROECTOS\RED-REGULADOR FASE\STM32F~4\" "32F407xx" "F4" "stm32f_ccm64.ld" "8000000" "512K" "128K"
Device STM32F407xx
F:\PROECTOS\RED-REGULADOR FASE\STM32F~4>arm-none-eabi-gcc -mcpu=cortex-m4 -mthumb -mfloat-abi=hard -mfpu=fpv4-sp-d16 -Os -DSTM32 -DSTM32F4 -DSTM32F407xx -DUSE_HAL_DRIVER -DHSE_VALUE=8000000 -IC:\PROGRA~2\FLOWCO~1\COMPIL~1\STARM\batch\..\stm32cubeF4\Drivers\CMSIS\Include -IC:\PROGRA~2\FLOWCO~1\COMPIL~1\STARM\batch\..\stm32cubeF4\Drivers\CMSIS\Device\ST\STM32F4xx\Include -IC:\PROGRA~2\FLOWCO~1\COMPIL~1\STARM\batch\..\stm32cubeF4\Drivers\STM32F4xx_HAL_Driver\Inc -IC:\PROGRA~2\FLOWCO~1\COMPIL~1\STARM\batch\..\stm32cubeF4\Drivers\STM32F4xx_HAL_Driver\Inc\Legacy -IC:\PROGRA~2\FLOWCO~1\COMPIL~1\STARM\batch\..\inc -fmessage-length=0 -fdata-sections -ffunction-sections -w -c "REGULADOR_83_01.c" -o "REGULADOR_83_01_STM32F407xx_8000000\REGULADOR_83_01.o"
In file included from C:\Program Files (x86)\Flowcode 7\CAL\includes.c:289:0,
from REGULADOR_83_01.c
C:\Program Files (x86)\Flowcode 7\CAL\STARM\STARM_CAL_I2C.c: In function 'FC_CAL_I2C_Master_Init_1':
C:\Program Files (x86)\Flowcode 7\CAL\STARM\STARM_CAL_I2C.c:262:4: error: #error "ARM does not support I2C in this mode - SW implementation only"
#error "ARM does not support I2C in this mode - SW implementation only"
^
Error(s) in build
C:\Program Files (x86)\Flowcode 7\compilers\STARM\batch\stm32comp.bat notificado código de error 1
FINALIZAD
I installed FC 7.3.0.5, I2C error occurred.
FC 7.2.1.4 + Patch FC 7.3.0.5 the same error.
I2C is installed in the software mode 400 kbps.
Tell me what the problem is.
Thank you.
=============================
Generated by: Flowcode v7.3.0.5
Date: Thursday, February 15, 2018 19:21:21
Iniciando el compilador…
C:\Program Files (x86)\Flowcode 7\compilers\STARM\batch\stm32comp.bat "REGULADOR_83_01" "F:\PROECTOS\RED-REGULADOR FASE\STM32F~4\" "32F407xx" "F4" "stm32f_ccm64.ld" "8000000" "512K" "128K"
Device STM32F407xx
F:\PROECTOS\RED-REGULADOR FASE\STM32F~4>arm-none-eabi-gcc -mcpu=cortex-m4 -mthumb -mfloat-abi=hard -mfpu=fpv4-sp-d16 -Os -DSTM32 -DSTM32F4 -DSTM32F407xx -DUSE_HAL_DRIVER -DHSE_VALUE=8000000 -IC:\PROGRA~2\FLOWCO~1\COMPIL~1\STARM\batch\..\stm32cubeF4\Drivers\CMSIS\Include -IC:\PROGRA~2\FLOWCO~1\COMPIL~1\STARM\batch\..\stm32cubeF4\Drivers\CMSIS\Device\ST\STM32F4xx\Include -IC:\PROGRA~2\FLOWCO~1\COMPIL~1\STARM\batch\..\stm32cubeF4\Drivers\STM32F4xx_HAL_Driver\Inc -IC:\PROGRA~2\FLOWCO~1\COMPIL~1\STARM\batch\..\stm32cubeF4\Drivers\STM32F4xx_HAL_Driver\Inc\Legacy -IC:\PROGRA~2\FLOWCO~1\COMPIL~1\STARM\batch\..\inc -fmessage-length=0 -fdata-sections -ffunction-sections -w -c "REGULADOR_83_01.c" -o "REGULADOR_83_01_STM32F407xx_8000000\REGULADOR_83_01.o"
In file included from C:\Program Files (x86)\Flowcode 7\CAL\includes.c:289:0,
from REGULADOR_83_01.c
C:\Program Files (x86)\Flowcode 7\CAL\STARM\STARM_CAL_I2C.c: In function 'FC_CAL_I2C_Master_Init_1':
C:\Program Files (x86)\Flowcode 7\CAL\STARM\STARM_CAL_I2C.c:262:4: error: #error "ARM does not support I2C in this mode - SW implementation only"
#error "ARM does not support I2C in this mode - SW implementation only"
^
Error(s) in build
C:\Program Files (x86)\Flowcode 7\compilers\STARM\batch\stm32comp.bat notificado código de error 1
FINALIZAD