When importing a Flowchart from V6, LED and Switch array will always be set to port B.
For example with 16F1937.
in Flwocde V6, I set a LED array to port C and Switch array to port D.
Loaded saved flowchart in V7 and both LED and Switch array defaulted to port B.
Martin
LED and Switch Array Wrong Port Assigned.
Moderator: Benj
-
- Matrix Staff
- Posts: 9520
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
- Contact: