Model 3D STEP to Mesh

For Flowcode users to discuss projects, flowcharts, and any other issues related to Flowcode 7.

Moderator: Benj

Post Reply
sundgau
Posts: 78
Joined: Mon Sep 26, 2011 4:18 pm
Has thanked: 5 times
Been thanked: 10 times
Contact:

Model 3D STEP to Mesh

Post by sundgau »

Hello,

on a pc, the conversion of STEP file to mesh works well but the converter does not launch on the second PC and the result is an image without link
Screen Shot 02-06-20 at 05.17 AM.PNG
(8.13 KiB) Downloaded 1065 times
...
I tried to inhibit the anti-virus, reinstall flowcode but nothing helps!
An idea?
thank you in advance

Bruno

PS: On both PCs:
Windows 10 (1909) and flowcode version 7.3.0.7

User avatar
Benj
Matrix Staff
Posts: 15312
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4803 times
Been thanked: 4314 times
Contact:

Re: Model 3D STEP to Mesh

Post by Benj »

Hi Bruno,

I believe the converter opens a pop up window. Is the pop up window maybe being hidden behind something or off screen?

sundgau
Posts: 78
Joined: Mon Sep 26, 2011 4:18 pm
Has thanked: 5 times
Been thanked: 10 times
Contact:

Re: Model 3D STEP to Mesh

Post by sundgau »

Hello,
I still haven't solved this problem. Do you have a suggestion for me? The following popup window does not open and flowcode does not convert 3d files to a "mesh" file, so no link is created in "mesh".
I can, however, upload a mesh file created with another PC!
Screen Shot 03-13-20 at 01.01 PM.PNG
(14.77 KiB) Downloaded 915 times
I don't have or no longer have this window. I tested all the solutions: uninstall, clean up registry, installation in administrator mode, execution in administrator mode ... All the other functionalities of fc work well
Screen Shot 03-13-20 at 01.21 PM 001.PNG
(4.57 KiB) Downloaded 915 times
An idea?
thank you in advance

Bruno

stefan.erni
Valued Contributor
Valued Contributor
Posts: 654
Joined: Fri Aug 19, 2016 2:09 pm
Location: switzerland
Has thanked: 182 times
Been thanked: 179 times
Contact:

Re: Model 3D STEP to Mesh

Post by stefan.erni »

Hi Bruno

Check your path from the filename. Sometimes letter like "äöüé" from swiss-german give this problems.
or
There is a trial software for 90 day's you can use for convert, test, remesh, from all format to all format....

https://www.rhino3d.com/de/download


regards

Stefan

Post Reply