Interrupt Frequency

For Flowcode users to discuss projects, flowcharts, and any other issues related to Flowcode 7.

Moderator: Benj

Post Reply
alanwms
Posts: 67
Joined: Tue Sep 16, 2008 2:09 pm
Location: Minnesota USA
Has thanked: 4 times
Been thanked: 17 times
Contact:

Interrupt Frequency

Post by alanwms »

Clock Speeds.jpg
Clock Speeds.jpg (42.38 KiB) Viewed 3358 times
Hello Ben:

With an interrupt that is hartware driven (Interrupt on Pin 1), how come the timer interrupt parameters show 15 Hz?
I suspect that this is a mistake since it never changed even if I change the project clock speeds. Can you help me understand that?

User avatar
Benj
Matrix Staff
Posts: 15312
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4803 times
Been thanked: 4314 times
Contact:

Re: Interrupt Frequency

Post by Benj »

Hello,

Yes this looks like a bug, the value is greyed out but probably shouldn't be being shown at all for a none timer based interrupt.

You can safely disregard it anyway :D

alanwms
Posts: 67
Joined: Tue Sep 16, 2008 2:09 pm
Location: Minnesota USA
Has thanked: 4 times
Been thanked: 17 times
Contact:

Re: Interrupt Frequency

Post by alanwms »

Thanks Ben - Merry Christmas.

Hokum52
Posts: 6
Joined: Sat Dec 28, 2019 7:34 pm
Been thanked: 2 times
Contact:

Re: Interrupt Frequency

Post by Hokum52 »

Oh, so it has no effect and can just be forgotten? That's great news, I had seen that and was worried about doing something wrong.

Post Reply