Hi all
Is there a reason why it is not possible to read analogue values from AN4 from this PIC?
Al ANx inputs are available, but not AN4.
Easy to reproduce : new project, target=PIC18F2455 and add potentiometer. Try to connect the potmeter to AN4...
Greetings
PIC18F2455 and AN4
Moderator: Benj
- faveremario
- Posts: 28
- Joined: Sat Jun 02, 2012 6:08 pm
- Has thanked: 8 times
- Been thanked: 13 times
- Contact:
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: PIC18F2455 and AN4
Many thanks for letting us know of the problem. I have fixed the problem by editing the definition file for you.
Simply copy the file to your "Flowcode 7/FCD/PIC" folder and restart Flowcode to load the changes.
Let us know how you get on.
Simply copy the file to your "Flowcode 7/FCD/PIC" folder and restart Flowcode to load the changes.
Let us know how you get on.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel