Using Mloader and trying to program a PIC18F26K80 i get the following message
Using a PIC16F88 and it works ok.
. Unable to program using Mloader
Moderator: Benj
- Steve
- Matrix Staff
- Posts: 3424
- Joined: Tue Jan 03, 2006 3:59 pm
- Has thanked: 114 times
- Been thanked: 422 times
- Contact:
Re: Unable to program using Mloader
mLoader does not support the k80 at the moment and I cannot test it here because I do not have any of those chips, but I have tried to guess the fix...
If you use the attached files instead of the ones in the mLoader directory then it might work, but I cannot guarantee it.
If you do try, please make a copy of the original files and also let me know how you get on. If it works, we will add the files to the next update of Flowcode.
If you use the attached files instead of the ones in the mLoader directory then it might work, but I cannot guarantee it.
If you do try, please make a copy of the original files and also let me know how you get on. If it works, we will add the files to the next update of Flowcode.
- Attachments
-
- 8bConfigData.csv
- (101.59 KiB) Downloaded 242 times
-
- ppp_chip_script.cfg
- (32.11 KiB) Downloaded 247 times
-
- Flowcode v5 User
- Posts: 199
- Joined: Thu Sep 10, 2009 10:57 pm
- Location: New Zealand
- Has thanked: 93 times
- Been thanked: 76 times
- Contact:
Re: Unable to program using Mloader
Hi Steve,
I have transferred over the files and tried programming the chip but get this message now.
There is no rush for this , its something i found and thought i would let you know.
I have transferred over the files and tried programming the chip but get this message now.
There is no rush for this , its something i found and thought i would let you know.