I want to set up ICD 3 in FC7.
what is in "location"?
what is written in the "parameter"?
Many thanks in advance
ICD3 and FC7
Moderator: Benj
- Steve
- Matrix Staff
- Posts: 3424
- Joined: Tue Jan 03, 2006 3:59 pm
- Has thanked: 114 times
- Been thanked: 422 times
- Contact:
Re: ICD3 and FC7
This may help, but is a bit old:
http://www.matrixtsl.com/faq/index.php? ... light=icd3
There's also information here:
http://www.matrixtsl.com/wikiv7/index.p ... _.28NEW.29
You should also be able to use the "ipecmd.exe" tool to program the ICD3, but I don't know the correct command line parameters.
http://www.matrixtsl.com/faq/index.php? ... light=icd3
There's also information here:
http://www.matrixtsl.com/wikiv7/index.p ... _.28NEW.29
You should also be able to use the "ipecmd.exe" tool to program the ICD3, but I don't know the correct command line parameters.
-
- Posts: 39
- Joined: Sat Jul 16, 2016 12:08 pm
- Has thanked: 4 times
- Been thanked: 2 times
- Contact:
Re: ICD3 and FC7
Thank you, it does not work.
I use Windows 10 (64 bit)
I have MPLAB v3.35 installed.
The IPE window does not start.
I use Windows 10 (64 bit)
I have MPLAB v3.35 installed.
The IPE window does not start.
-
- Posts: 39
- Joined: Sat Jul 16, 2016 12:08 pm
- Has thanked: 4 times
- Been thanked: 2 times
- Contact:
Re: ICD3 and FC7
I get an error message.
C: \ Program Files (x86) \ Microchip \ MPLABX \ v3.30 \ mplab_ipe \ ipecmd.exe reported error code -1
C: \ Program Files (x86) \ Microchip \ MPLABX \ v3.30 \ mplab_ipe \ ipecmd.exe reported error code -1
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: ICD3 and FC7
Hi Speed64,
Any joy with this? If not then what programmer settings are you using and we will double check them for you.
Any joy with this? If not then what programmer settings are you using and we will double check them for you.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Posts: 39
- Joined: Sat Jul 16, 2016 12:08 pm
- Has thanked: 4 times
- Been thanked: 2 times
- Contact:
Re: ICD3 and FC7
Hellow:
When I start the programmer manually following is specified as the destination.
"C:\Program Files (x86)\Microchip\MPLABX\v3.35\sys\java\jre1.8.0_91\bin\javaw.exe" -jar "C:\Program Files (x86)\Microchip\MPLABX\v3.35/mplab_ipe/ipe.jar"
Running in:
"C:\Program Files (x86)\Microchip\MPLABX\v3.35\sys\java\jre1.8.0_91\bin"
without parameters
When I start the programmer manually following is specified as the destination.
"C:\Program Files (x86)\Microchip\MPLABX\v3.35\sys\java\jre1.8.0_91\bin\javaw.exe" -jar "C:\Program Files (x86)\Microchip\MPLABX\v3.35/mplab_ipe/ipe.jar"
Running in:
"C:\Program Files (x86)\Microchip\MPLABX\v3.35\sys\java\jre1.8.0_91\bin"
without parameters