Using ASM4PICS with Windows 10

For C and ASSEMBLY users to post questions and code snippets for programming in C and ASSEMBLY. And for any other C or ASM course related questions.

Moderators: Benj, Mods

Post Reply
emersok
Posts: 13
Joined: Wed May 30, 2012 10:08 am
Been thanked: 1 time
Contact:

Using ASM4PICS with Windows 10

Post by emersok »

Hi,
We use the assembler for PIC microcontrollers (ASM4PICS) with the Eblocks boards. I recently tried using a Windows 10 laptop. Software loaded and ran OK but the USB cable could not be found. We will be going over to Windows 10 in the next year or so. We therefore need a solution as we wish to continue using the Eblocks and the ASM4PICs course.

Thank you

User avatar
Benj
Matrix Staff
Posts: 15312
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4803 times
Been thanked: 4314 times
Contact:

Re: Using ASM4PICS with Windows 10

Post by Benj »

Hello,

The E-blocks are known to work well with Windows 10 so you shouldn't have any problems there. Maybe make sure the USB driver is installed correctly and you can see the device in device manager.

Here is a link to the USB driver.

EB006 v8 and previous + HP488 - http://www.matrixtsl.com/resources/getresource.php?id=6
EB006 v9 - http://www.matrixtsl.com/resources/getr ... php?id=744

Let us know how you get on.

User avatar
Steve
Matrix Staff
Posts: 3418
Joined: Tue Jan 03, 2006 3:59 pm
Has thanked: 114 times
Been thanked: 422 times
Contact:

Re: Using ASM4PICS with Windows 10

Post by Steve »

And so you're aware, we are about to release a new version of the Assembly for PICmicros course which has better support for modern browsers and is suitable for our current (EB006v9) E-Blocks boards.

As well as updating the software, we have made hardware improvements too. You might be aware that the EB006 v9 board does not have a slow-mo RC clock option for clocking the chip at a few Hz, which is essential in the initial section of the Assembly course. To overcome this, we have created a small add-on board that attaches to the EB006 v9 and provides this facility.

More information will be available on our website soon, but if you have any questions in the meantime then please get in touch.

Thanks
Steve.

Post Reply