SOLVED: RS232 - cannot get /n /r to be detected...

A forums to allow bugs and problems with Flowcode v6 to be reported and resolved.

Moderator: Benj

Post Reply
EtsDriver
Posts: 444
Joined: Tue Apr 15, 2014 4:19 pm
Location: Kajaani, Finland
Has thanked: 345 times
Been thanked: 227 times
Contact:

SOLVED: RS232 - cannot get /n /r to be detected...

Post by EtsDriver »

SOLVED BY REBUILDING whole thing into new flowchart, dont know what got messed up, but the RS232 macro on the first one just kept timing out no matter what.
Im quoting myself here! :) wrote:Hi!

Im using simple macro loop to receive until received char is 13 or 15.. For some reason, not in simulation or in real hardware, i cant seem to get flowcode to detect the ascii 13 or ascii 15 sent to it...
rs232_recv.PNG
(16.88 KiB) Downloaded 1254 times
Using FC6 professional version 6.1.3.2
Ill just keep the good work up!

Post Reply