Hi!
I using Displaytech 64128Q 128x64 dot matrix lcd (controller/driver SB6400G-D/SB0064, eqv. KS0108). Problem: print text message not visible or not working. Draw rectangle and line it's work. I probably setting foreground and background colors (properties panel and componens macro-lcd) and search the forum similar problem, but did not succeed. If i using the print function (text or numbers), sometimes vertical lines draws the display (left top => right bottom). I using Flowcode 6.1.3.2., trying previous version (v. 6.1.2.0.), and in the forum repaired gLCD_KS0108.fcpx. Any ideas?
P.S.: Sorry my bad english.
KS0108 print function
Moderator: Benj
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: KS0108 print function
Hello,
Please can you post your program so we can have a look. Thanks.
Please can you post your program so we can have a look. Thanks.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Re: KS0108 print function
Hello Benj!
Thank you for reply!
Thank you for reply!
- Attachments
-
- Glcd3.fcfx
- (7.55 KiB) Downloaded 298 times
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: KS0108 print function
Hello,
In the configuration options set the Extended Instruction Set item to disabled. Hopefully this should solve the problem for you.
In the configuration options set the Extended Instruction Set item to disabled. Hopefully this should solve the problem for you.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Re: KS0108 print function
Hello Benj!
Thank you for the idea, i set extended instruction set enable bit (Xinst) "enable", but there is not a change. If I claim a text (Print) and rectangle, it's empty the display is left over, if only rectangle, it appears then. Maybe this Glcd not compatible the Ks0108? Do not be looking for a solution if this is the situation, I would not like to hold you up with a unnecessary problem. Thank for your help, have a nice day!
Thank you for the idea, i set extended instruction set enable bit (Xinst) "enable", but there is not a change. If I claim a text (Print) and rectangle, it's empty the display is left over, if only rectangle, it appears then. Maybe this Glcd not compatible the Ks0108? Do not be looking for a solution if this is the situation, I would not like to hold you up with a unnecessary problem. Thank for your help, have a nice day!
- Attachments
-
- Gl2.fcfx
- Display empty
- (6.08 KiB) Downloaded 299 times
-
- Gl.fcfx
- Rectangle visible
- (5.73 KiB) Downloaded 324 times
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: KS0108 print function
Hello,
You need to set the config setting to "disabled" and it should solve the problem.
When the extended instruction set is enabled it causes problems with string based data.
As your able to print objects correctly it looks like the display is fine and it's just the strings that have an issue.
You need to set the config setting to "disabled" and it should solve the problem.
When the extended instruction set is enabled it causes problems with string based data.
As your able to print objects correctly it looks like the display is fine and it's just the strings that have an issue.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Re: KS0108 print function
Hello Benj!
Thank you for your help, there is not a change (XINST enable or disable). It might be that your truth, and the chip config settings the problem. I have little time now this way, but I write here if he will be a change. I say thank you for it once more, with a step more forward I am.
Thank you for your help, there is not a change (XINST enable or disable). It might be that your truth, and the chip config settings the problem. I have little time now this way, but I write here if he will be a change. I say thank you for it once more, with a step more forward I am.