18F45K50 configuartion for internal oscilator 16Mhz
Moderator: Benj
-
- Flowcode V4 User
- Posts: 2
- Joined: Fri Oct 15, 2010 11:46 am
- Contact:
18F45K50 configuartion for internal oscilator 16Mhz
The 18F45K50 configuration does not work properly. I use internal 16MHz oscillator. But simple 10 millisecond delay does not accurate. Please send me sample configuration for 18F45K50 for Flowcode6.
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: 18F45K50 configuartion for internal oscilator 16Mhz
Hello,
The internal oscillator defaults to 1MHz on the 45K50 device. Here is an example set to run at 16MHz.
If you attach your program in future then we can offer better help by pointing out what you have got right and what you may need to edit.
The internal oscillator defaults to 1MHz on the 45K50 device. Here is an example set to run at 16MHz.
If you attach your program in future then we can offer better help by pointing out what you have got right and what you may need to edit.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel