Modbus Slave Component
Moderator: Benj
Forum rules
Only feature requests will be considered here. General questions should not be posted in this forum.
Only feature requests will be considered here. General questions should not be posted in this forum.
- STibor
- Posts: 263
- Joined: Fri Dec 16, 2011 3:20 pm
- Has thanked: 116 times
- Been thanked: 113 times
- Contact:
Modbus Slave Component
Hello!
I see that there is a Modbus master component. (I have not used this component)
It is possible that in the near future will be Modbus slave components?
Thanks for the reply!
I see that there is a Modbus master component. (I have not used this component)
It is possible that in the near future will be Modbus slave components?
Thanks for the reply!
- Steve001
- Valued Contributor
- Posts: 1189
- Joined: Wed Dec 31, 2008 3:37 pm
- Has thanked: 460 times
- Been thanked: 523 times
- Contact:
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Modbus Slave Component
Hello,
It has been started, I just need to find some time to finish it and test it works. Hopefully coming soon....
It has been started, I just need to find some time to finish it and test it works. Hopefully coming soon....
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Posts: 54
- Joined: Mon Dec 30, 2013 2:09 am
- Has thanked: 15 times
- Been thanked: 10 times
- Contact:
Re: Modbus Slave Component
You are my hero.Benj wrote:Hello,
It has been started, I just need to find some time to finish it and test it works. Hopefully coming soon....
I love you (as a master)
- STibor
- Posts: 263
- Joined: Fri Dec 16, 2011 3:20 pm
- Has thanked: 116 times
- Been thanked: 113 times
- Contact:
Re: Modbus Slave Component
Hello!
I ask whether there is a project?
I got a PLC, it has RS485 Modbus.
For this I want to connect many different little slave circuits.
I ask whether there is a project?
I got a PLC, it has RS485 Modbus.
For this I want to connect many different little slave circuits.
-
- Posts: 54
- Joined: Mon Dec 30, 2013 2:09 am
- Has thanked: 15 times
- Been thanked: 10 times
- Contact:
Re: Modbus Slave Component
Ben is working for modbus slave component.When he finish i bleave that you can do youre project easy.STibor wrote:Hello!
I ask whether there is a project?
I got a PLC, it has RS485 Modbus.
For this I want to connect many different little slave circuits.
- STibor
- Posts: 263
- Joined: Fri Dec 16, 2011 3:20 pm
- Has thanked: 116 times
- Been thanked: 113 times
- Contact:
Re: Modbus Slave Component
Hello!Steve001 wrote:Hello STibor
Have you seen this post
http://www.matrixtsl.com/mmforums/viewt ... lit=modbus
Steve
Thanks for the link.
I'm beginning to understand the Modbus communication.
I use it successfully, "Artose's" sample code.
http://www.matrixtsl.com/mmforums/viewt ... 676#p50966
@Benj
I looked at the Flowcode6 Modbus master component, but I do not see data direction control output.
How is a Modbus hardware, if there is no data direction control?
- Steve001
- Valued Contributor
- Posts: 1189
- Joined: Wed Dec 31, 2008 3:37 pm
- Has thanked: 460 times
- Been thanked: 523 times
- Contact:
-
- Posts: 54
- Joined: Mon Dec 30, 2013 2:09 am
- Has thanked: 15 times
- Been thanked: 10 times
- Contact:
Re: Modbus Slave Component
You must chose RS485 then you will have data direction.STibor wrote:Hello!Steve001 wrote:Hello STibor
Have you seen this post
http://www.matrixtsl.com/mmforums/viewt ... lit=modbus
Steve
Thanks for the link.
I'm beginning to understand the Modbus communication.
I use it successfully, "Artose's" sample code.
http://www.matrixtsl.com/mmforums/viewt ... 676#p50966
@Benj
I looked at the Flowcode6 Modbus master component, but I do not see data direction control output.
How is a Modbus hardware, if there is no data direction control?
In RS232 we don't have direction. And Ben is working for Slave component when he finish my dreams will be real
-
- Posts: 65
- Joined: Thu Feb 07, 2008 7:59 am
- Has thanked: 17 times
- Been thanked: 10 times
- Contact:
Re: Modbus Slave Component
Hello
Is there perhaps an indication when the 485 Slave modbus is ready for testing or perhaps finished
Is there perhaps an indication when the 485 Slave modbus is ready for testing or perhaps finished
-
- Posts: 54
- Joined: Mon Dec 30, 2013 2:09 am
- Has thanked: 15 times
- Been thanked: 10 times
- Contact:
Re: Modbus Slave Component
http://www.matrixtsl.com/mmforums/viewt ... 32&t=17572
Waiting a hero to finish it
Thrust me my friend it's not easy.
I try to finish so many times always mistakes happens.
Then we need a proffesional to finish it.
Waiting a hero to finish it
Thrust me my friend it's not easy.
I try to finish so many times always mistakes happens.
Then we need a proffesional to finish it.
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Modbus Slave Component
Hello,
Some good news for you...
I have been granted some time to finish off the Modbus slave component so it will be included in the release of Flowcode 7. As this is a fairly substantial amount of work the Modbus slave will not be released as a free component.
I've already managed to get a lot of the code up and running now so just some finishing off and testing to do.
Change the Bus property from RS232 to RS485 and this adds a data direction control pin and variable read state properties.@Benj
I looked at the Flowcode6 Modbus master component, but I do not see data direction control output.
Some good news for you...
I have been granted some time to finish off the Modbus slave component so it will be included in the release of Flowcode 7. As this is a fairly substantial amount of work the Modbus slave will not be released as a free component.
I've already managed to get a lot of the code up and running now so just some finishing off and testing to do.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Posts: 54
- Joined: Mon Dec 30, 2013 2:09 am
- Has thanked: 15 times
- Been thanked: 10 times
- Contact:
Re: Modbus Slave Component
This is a wonderfull news.Benj wrote:Hello,
Change the Bus property from RS232 to RS485 and this adds a data direction control pin and variable read state properties.@Benj
I looked at the Flowcode6 Modbus master component, but I do not see data direction control output.
Some good news for you...
I have been granted some time to finish off the Modbus slave component so it will be included in the release of Flowcode 7. As this is a fairly substantial amount of work the Modbus slave will not be released as a free component.
I've already managed to get a lot of the code up and running now so just some finishing off and testing to do.
Yeaha at last i will meet with modbus.
Is there a sellected date for Flowcode 7?