I recently discovered the PIC's with RF capability. (like the rfPIC12F675).
Wouldn't it be great to have an "internal RF component" like the "internal CAN component"?
I have the RF Eblocks, but it would be great to implement this feature straight onto the PCB without extra IC's?
So my new feature request is an "internal RF component"..
Thanks for implementing this features before the end of the week!
Internal RF component
Moderator: Benj
Forum rules
Only feature requests will be considered here. General questions should not be posted in this forum.
Only feature requests will be considered here. General questions should not be posted in this forum.
-
- Posts: 116
- Joined: Tue Jul 17, 2012 9:34 am
- Been thanked: 18 times
- Contact:
Re: Internal RF component
Thanks for the "Heads up" on that interesting device. I can see lots of potential projects on the horizon.
A Flowcode component would be great.
Stewart
A Flowcode component would be great.
Stewart
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Internal RF component
Hello,
I've done a bit of digging around and managed to find this.
All written in assembler but should be possible to confirm it's working and then port the code across into a Flowcode 6 component.
I really don't have much time on my hands at the moment to look at things like this but I will try and help if you decide to have a go.
I've done a bit of digging around and managed to find this.
All written in assembler but should be possible to confirm it's working and then port the code across into a Flowcode 6 component.
I really don't have much time on my hands at the moment to look at things like this but I will try and help if you decide to have a go.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Posts: 502
- Joined: Wed Nov 07, 2007 6:51 pm
- Location: Antwerp Belgium
- Has thanked: 121 times
- Been thanked: 108 times
- Contact:
Re: Internal RF component
Ha, thank you,Benj wrote: I've done a bit of digging around and managed to find this.
All written in assembler but should be possible to confirm it's working and then port the code across into a Flowcode 6 component.
I really don't have much time on my hands at the moment to look at things like this but I will try and help if you decide to have a go.
I don't have the target device yet, but when Matrix offers a ready to use component, I will certainly buy the device
I don't like to get into code too deep, so that's the reason I'v bought FC (from early version 3 on).
This is why I've posted this feature in the feature request.
Instead of the end of the week I will give you another month? Fair enough? (*)
(*) just a joke..