TMR0 INTERRUPTION PLUS PWM ECIO40

Please add any bug reports that require discussion here

Moderator: Benj

Forum rules
Only bug reports will be considered here. General questions should not be posted in this forum.
Post Reply
ALOPEZ
Posts: 27
Joined: Tue Nov 26, 2013 8:37 pm
Been thanked: 1 time
Contact:

TMR0 INTERRUPTION PLUS PWM ECIO40

Post by ALOPEZ »

Hello,
I'm trying to use timer int plus pwm. In simulaiton works fine, but in hardware just work int or pwm if i try at same time doesn't work.
please i need help. PLease find attach project.
thanks
Attachments
pwm.fcfx
(8.51 KiB) Downloaded 288 times

User avatar
Benj
Matrix Staff
Posts: 15312
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4803 times
Been thanked: 4314 times
Contact:

Re: TMR0 INTERRUPTION PLUS PWM ECIO40

Post by Benj »

Hello,

Please can you give this a go and see if it's any better, Timer 0 and PWM should work ok together. The ICD setting in the debug menu was switched on which means the hardware would sit and wait for input from an ICD tool when you compile to the device.
Attachments
pwm.fcfx
(8.5 KiB) Downloaded 280 times

ALOPEZ
Posts: 27
Joined: Tue Nov 26, 2013 8:37 pm
Been thanked: 1 time
Contact:

Re: TMR0 INTERRUPTION PLUS PWM ECIO40

Post by ALOPEZ »

thanks Benj, but I can't open your file. please see file attach with a printed screen.thanks
Attachments
Sin título.png
(154.42 KiB) Downloaded 975 times

Post Reply