Page 1 of 1
PWM from FC5 not importing corectly
Posted: Sat Aug 17, 2013 9:47 am
by medelec35
When loading FC5 that has PWM set duty cycle (8bit) then unknown or missing component is displayed.
Re: PWM from FC5 not importing corectly
Posted: Mon Aug 19, 2013 10:01 am
by medelec35
I would like to add to this list, components not importing correctly:
one_wire
can
EEPROM
Re: PWM from FC5 not importing corectly
Posted: Fri Aug 23, 2013 10:49 pm
by medelec35
With Patch2 installed PWM still not importing correcty.
Wong generic component icon is generated:
Re: PWM from FC5 not importing corectly
Posted: Sat Aug 24, 2013 8:38 am
by jgu1
Hi Martin!
The same by me.
Jorgen
Re: PWM from FC5 not importing corectly
Posted: Thu Aug 29, 2013 10:57 am
by jgu1
Hi!
For info!!!
After install Path3, I still have the same problem. Maybe not fixed in this path.
regard.
Jorgen
Re: PWM from FC5 not importing corectly
Posted: Thu Aug 29, 2013 11:20 am
by medelec35
Hi Jorgen,
I'm currently compiling a list of 'Patch 3 outstanding reported bugs'
So for I have 3 items on the list and that is one of them
Will be looking for more outstanding issues then posting it after have sorted something else out first.
Martin
Re: PWM from FC5 not importing corectly
Posted: Thu Aug 29, 2013 11:37 am
by jgu1
Ok Martin!
It is only for info to help MM. By the way, It´s the same for EEprom.
Please do not believe it's to complain.
"As you know a fool can ask more than ten wise is able to answer"
Jorgen
Re: PWM from FC5 not importing corectly
Posted: Thu Aug 29, 2013 11:59 am
by medelec35
Hi Jorgen,
I may have worded my post in such a way, it could be seen as criticising you.
This is definitely not the case!
Its great that you have found outstanding issues, and your not seen as complaining at all (in my eyes anyway)!
My post was trying to say (badly) that I totally agree with what your saying, and I'm was posting the same information.
To be fair on you, I will remove the points you mentioned.
I know I'm not mm staff, but your doing a great job of looking for bugs!
Sorry if I appeared to be negative, that was not intended.
Martin
Re: PWM from FC5 not importing corectly
Posted: Thu Aug 29, 2013 5:18 pm
by jgu1
Hi Martin!
No, no, Martin you have have NOT criticising or appeared to be negative at all. Absolutely NOT.
This: "As you know a fool can ask more than ten wise is able to answer" was only a joke from me, (we say here in Denmark for joking).
I understood your previous answer: as you always do, kindly, friendly, helpfull and doing a great job for everybody here. Seriously.
I continue to ask you.
Never no bad feeling from me.
Have a nice evening Martin.
Best regard
Jorgen.
Re: PWM from FC5 not importing corectly
Posted: Sun Oct 27, 2013 12:03 am
by medelec35
Just an update with importing with FC V6.0.3
With The MIAC:
PWM component is now importing correctly (no errors displayed when running) Except for the settings, e.g period & Prescaler.
Martin