EDIT THE COMPONENT KEYPAD

For Flowcode users to discuss projects, flowcharts, and any other issues related to Flowcode 6.

Moderator: Benj

Post Reply
Genilsonsa
Posts: 150
Joined: Mon Oct 15, 2012 5:19 pm
Has thanked: 12 times
Been thanked: 18 times
Contact:

EDIT THE COMPONENT KEYPAD

Post by Genilsonsa »

Hello all welcome .I would like to know if i edit the component Keypad to change the logic of the PullDown for Pullup.If it is not possible to make directly in the component .Thanks to all
Attachments
Capturar.PNG
(173.48 KiB) Downloaded 1069 times

User avatar
Benj
Matrix Staff
Posts: 15312
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4803 times
Been thanked: 4314 times
Contact:

Re: EDIT THE COMPONENT KEYPAD

Post by Benj »

Hello,

This is not currently supported by the component. We can look to add it to the latest version but it's unlikely we will add the functionality for Flowcode 6.

You could always create your own macro routine for scanning for key presses to allow for the inverted polarity. You could also use an inverted buffer IC to flip the signals going back to the microcontroller.

Genilsonsa
Posts: 150
Joined: Mon Oct 15, 2012 5:19 pm
Has thanked: 12 times
Been thanked: 18 times
Contact:

Re: EDIT THE COMPONENT KEYPAD

Post by Genilsonsa »

Hello Benj thank you for answer me.In that case I create a macro to make a positive sweep.

Post Reply