"A Complete non-sense problem"
Posted: Sun Jul 10, 2016 7:55 pm
I'm having a very strange problem with a single program. I'm been using a KS108 display because the size and visibility. I did a program a digital thermometer sometime ago with the MAX 6675 and the arduino microcontroller, when I use the program with a LCD 4x20 it works perfect but not when I use the KS108. In the beginning I thought I did change something accidently and that's why it did not work, I checked the program several times but no issue was found, it was all exactly the same, then I thought I messed up the MAX6675 accidently so I use another one, finally after all the effort and headache I decide to replaced the arduino mega with another mega board and I have the same result. Then I decide to use both at the same time to see what's going on but I can't comprehend the result, it works with the LCD but not with the KS108 display! everything looks normal the display just shows a fixed value, the calibration offset value. The one connected to the LCD displays the data and updates every time there is a temperature change. What could be the issue? I connected the hardware using the same pins and I also exchange the MAX6675 to make sure it was not the components. I got go idea of what's going on. Can this be a voltage issue? could it be that the KS108 pulls more current causing a malfunction? Please I need help with this issue. I got a project that is almost complete for an oven controller in my work place but this is the last component that is not working, everything else works perfect except this one. Can somebody help me? here are the two programs.