#### Is Flowcode useable for complex applicatios ####
Posted: Fri Nov 06, 2015 10:33 am
Hello,
before 1 month i bought Flowcode professional with ARM chippack.
The controller where I uses is an AT91SAM7S.
- The first problem was, that i cannot jump in external interrupt. This problem was fixed from Matrix very fast. I had become a new *.fcd file for the AT91SAM7S512_64 controller.
-The second problem was, that I cannot jump in serial interrupt macro. The reason of this problem was a declaration failure of the serial interrupts in the Flowcode software.
- The third problem is still actually. I cannot receive serial data in external interrupt. When I´m receiving serial data without interrupt is it ok. But when i´m receiving serial data in external interrupt i always become value 0xFF back. Now when I want to receive serial data without external interrupt again, the value i received is now also 0xFF. I can fix the problem only when i do reset the controller.
The ARM controllers are designed for complex applications. But I think the Flowcode software isn´t useable for these complex applications.
I´m interrested what do you think about complex applications in Flowcode and what does the Matrix company think about these problems. They are selling a product wich doesn´t work correctly in basic essential functions.
greetings
ARM
before 1 month i bought Flowcode professional with ARM chippack.
The controller where I uses is an AT91SAM7S.
- The first problem was, that i cannot jump in external interrupt. This problem was fixed from Matrix very fast. I had become a new *.fcd file for the AT91SAM7S512_64 controller.
-The second problem was, that I cannot jump in serial interrupt macro. The reason of this problem was a declaration failure of the serial interrupts in the Flowcode software.
- The third problem is still actually. I cannot receive serial data in external interrupt. When I´m receiving serial data without interrupt is it ok. But when i´m receiving serial data in external interrupt i always become value 0xFF back. Now when I want to receive serial data without external interrupt again, the value i received is now also 0xFF. I can fix the problem only when i do reset the controller.
The ARM controllers are designed for complex applications. But I think the Flowcode software isn´t useable for these complex applications.
I´m interrested what do you think about complex applications in Flowcode and what does the Matrix company think about these problems. They are selling a product wich doesn´t work correctly in basic essential functions.
greetings
ARM