Hi,
Im having a recurrence of a compiling problem which seems to relate to using the GOTO component macro...
The programme works in simulation fine but when attempting to compile, fails and comes up with errors regarding the GOTO.
Ive tried the previous work arounds in older FC versions (see my older posts) and have left work around C code in the Ini MACRo for you to see)
Programme is attached, please help!
Regards,
Chris
New GOTO problem
Moderator: Benj
-
- Posts: 186
- Joined: Wed Jan 23, 2013 3:43 pm
- Has thanked: 2 times
- Been thanked: 21 times
- Contact:
-
- Matrix Staff
- Posts: 9521
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
- Contact:
Re: New GOTO problem
Hi Chris,
Looks like the goto bug has not yet been sorted.
As a Temporary fix, can you replace with , in your supplementary code.
You will also nee to move the interrupt before main loop so its only activated once.
Finally with the feedback pot placed within interrupt macro, corruption could occur as a warning is flagged up about it.
Martin
Looks like the goto bug has not yet been sorted.
As a Temporary fix, can you replace
Code: Select all
#define FCC_IniSet_B FCC__B
Code: Select all
#define FCC__B FCC_Ini_file_B
You will also nee to move the interrupt before main loop so its only activated once.
Finally with the feedback pot placed within interrupt macro, corruption could occur as a warning is flagged up about it.
Martin
Martin
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: New GOTO problem
The Flowcode engineer had closed these bugs in the bug tracker but having a closer look the reason for closing the bugs was that he didn't understand the issue!!!
Anyway I've re-opened the bugs with the strict instructions to come and see me if they don't understand.
Sorry for the inconvenience, this is very annoying as I was sure it had been ticked off.
Now to search through the fixed bugs to see what else has been prematurely taken off the list.
Anyway I've re-opened the bugs with the strict instructions to come and see me if they don't understand.
Sorry for the inconvenience, this is very annoying as I was sure it had been ticked off.
Now to search through the fixed bugs to see what else has been prematurely taken off the list.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Posts: 186
- Joined: Wed Jan 23, 2013 3:43 pm
- Has thanked: 2 times
- Been thanked: 21 times
- Contact: