Hi
I've set up flowcode for the 24HJ128GP502 with a 12Mhz crystal in HS mode.
I set the clock option to 12Mhz and perform the delay test of 500mS on and 500ms off and Scope timing looks spot on.
I set up a hardware RS232 at 9600 baud and get bad data.
I set the clock options to 24Mhz and the RS232 output is now good but the delay test is now 1000mS on and 1000mS off.
could you advise please
Andy
bug 24HJ128GP502 RS232
Moderator: Benj