Hallo,
Flowcode : 6.0.3
MCU : 24F16KA102
Tact : 8MHz
I wrote a small programm. You can see that in the attachment.
If I save and close the programm and Flowcode 6.0.3 and I reopen the Programm and Flowcode 6.0.3 the elements C-Code is emty and the Output is B0 instead of B8.
HjH
Bug in the Flowcode 6.0.3
Moderator: Benj
- JonnyW
- Posts: 1230
- Joined: Fri Oct 29, 2010 9:13 am
- Location: Matrix Multimedia Ltd
- Has thanked: 63 times
- Been thanked: 290 times
- Contact:
Re: Bug in the Flowcode 6.0.3
Hello.
Thanks, we will look into this.
We were due for a 6.0.4, but want to get things nice and stable for this patch, so if I can find the issue will get it in that.
Jonny
Thanks, we will look into this.
We were due for a 6.0.4, but want to get things nice and stable for this patch, so if I can find the issue will get it in that.
Jonny
Re: Bug in the Flowcode 6.0.3 that restricted mywork
Hello,
I have a issue reported ago 15 days, that extrem restricted my work. I works often with element C-Code that lost the text after new start. Can you a way my say how I can bypass the problem.
HjH
I have a issue reported ago 15 days, that extrem restricted my work. I works often with element C-Code that lost the text after new start. Can you a way my say how I can bypass the problem.
HjH
- JonnyW
- Posts: 1230
- Joined: Fri Oct 29, 2010 9:13 am
- Location: Matrix Multimedia Ltd
- Has thanked: 63 times
- Been thanked: 290 times
- Contact:
Re: Bug in the Flowcode 6.0.3
Hi. The patch with that fix will hopefully be out Wednesday. We put the release back until then for extended testing.
If you really need something out the door before then then add a calculation icon, right click and select 'customize the C code' from the context menu. This will act as an alternate C code icon.
Jonny
If you really need something out the door before then then add a calculation icon, right click and select 'customize the C code' from the context menu. This will act as an alternate C code icon.
Jonny