BUG: Can Bus component

[Jordy101091]

Hi all,

When I use the can bus component I cannot turn the LEDs on and of in flowcode v6,
When I use flowcode v5 I can turn on and off the LEDs,

I don't know what the problem is maybe you could take a look for me.
For the moment I don't have a can device too hookup to check data transmission.

Regards jordy

[Benj]

Hi Jordy,

Thanks for the spot, investigating this now.

[Benj]

Hi Jordy,

Think I've fixed the issue now. Please can you have a go with this new component and see if it has sorted the issue for you.

[Jordy101091]

I have tried the component but the LEDs won't turn on.
I don't know what the problem is.

[Jordy101091]

Also when I load Flowcode with the new can component, In the systems panel the Icon of the CAN component is Huuuuuge.

[Benj]

Ok thanks I will investigate.

[Benj]

I have tried the component but the LEDs won't turn on.

Sorry it only seems to work if you first initialise with the v5 code. I will try and get this problem wrapped up.

[Jordy101091]

Hè ben,

Do you have progress on the problem or are you Bush with soms other Things.

Regards jordy

[LeighM]

Hi
Fixed CAN attached.
Regards,
Leigh

[Jordy101091]

Thanks MM Team I have it working now.