Page 1 of 1
Flowcode for AVR - BETA testers required
Posted: Mon Sep 10, 2007 3:41 pm
by Steve
We have recently been working on a new version of Flowcode that targets Atmel's AVR family of microprocessors. We are quite close to a finished product and will shortly begin some thorough testing.
We would like to hear from anyone who would like to help BETA test this new product.
Prospective BETA testers should have access to various AVR hardware (chips, development boards, etc) and should ideally have a basic understanding of Flowcode.
We will be able to offer free or reduced-rate copies of this new version of Flowcode to those who are selected.
Please contact me at this address if you are interested:
flowcode4avr@matrixmultimedia.co.uk
devices supported ?
Posted: Sun Sep 16, 2007 12:10 pm
by ALAN_26
hello Steve
Flowcode for AVR very interesting !!
What devices are currently supported ?
Posted: Mon Sep 17, 2007 12:21 pm
by Steve
Hello Alan,
We don't have a definitive list yet, but it looks to be all current MEGAs (up to and including 40-pin versions) and most current TINYs.
Are there particular devices (e.g. mature AT90s) you would like us to target?
RS232 CONPONENT FOR AVR
Posted: Thu Sep 20, 2007 5:48 pm
by ALAN_26
Hi steve maybe the 8051 series would be nice To
,
I made some research and found out that Some Atmel devices have a maximum operation frequency 8mhz 16mhz ( lower than 20mhz ) and have RS232 .
What I am trying to say is if you converted flowcode for avr with the same rs232 component it will not work properly because of the 20mhz bug .
Posted: Fri Sep 21, 2007 8:37 am
by Steve
I think that bug with the RS232 (where it assumed a 19.6608MHz oscillator) got fixed a long time ago. Please tell me if it hasn't, or if you are referring to a different problem.
On the 8051 devices, it is something we have thought of. But for now, we will release AVR and ARM versions and see what the uptake is.
Posted: Fri Sep 21, 2007 9:43 am
by ALAN_26
Ops sorry than I think I missed that Fix I didn’t know , OK that’s great to hear !.
So there will be Flowcode for AVR and another Flowcode for AMR is that right ?
Posted: Fri Sep 21, 2007 10:30 am
by Steve
Yep - Flowcode for AVR is scheduled for release in the next few months.
Flowcode for ARM will hopefully be released sometime early spring.
Posted: Mon Nov 26, 2007 10:16 am
by Steve
Just to update everyone - Flowcode for AVRs is currently being manufactured and will be available to buy in the next few weeks.
Flowcode for AVR
Posted: Mon Nov 26, 2007 11:36 pm
by Louis McIntyre
Hi Steve/Benji
Could we have an update on the status of Flowcode for AVR please?
Posted: Tue Nov 27, 2007 9:32 am
by Steve
Hello Louis,
It has been finished and is currently being manufactured. It should be available within 2 weeks.
Posted: Sun Dec 02, 2007 3:58 pm
by stgt
Hello Steve,
which limitations are there in the demo version of the Flowcode for AVR?
Thanks.
Posted: Mon Dec 03, 2007 2:04 pm
by Steve