Ian, Steve,
I have a student who is writing a clock routine that contiains three loops, seconds, minutes and hours. Display is to the LCD. His simulation works but when he tries to compile and download to the PIC he gets the following error.
---------
Flowcode was unable to compile the flowcharts C code due to the following errors:
No compilation error information is available.
If your flowchart contains C code, please review this carefully. If you flowchart contains no C code, or you have thoroughly reviewed the code, contact technical support.
----------
Any ideas?
Jack
Compiling error
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Hello
Send me the code and I will see if I can get it working.
Send me the code and I will see if I can get it working.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Compilation error
Hello, i have the same problem and i dont have c code in my flow chart. Then, i check very carefully my flow chart and i don't see any problem. When i tray to compile, it put the following message.
Flowcode was unable to compile the flowcharts C code due to the following errors:
No compilation error information is available.
If your flowchart contains C code, please review this carefully. If you flowchart contains no C code, or you have thoroughly reviewed the code, contact technical support.
Any idea. Thank you
Flowcode was unable to compile the flowcharts C code due to the following errors:
No compilation error information is available.
If your flowchart contains C code, please review this carefully. If you flowchart contains no C code, or you have thoroughly reviewed the code, contact technical support.
Any idea. Thank you