Hi all. I am trying to find the correct option in FlowCode 5 for PIC, to set the INTERNAL oscillator for my PIC 16F628A
The flip-flop circuit LED steady
I've tried all the hz
problem ?
Thank you for help
internal oscillator issue
Moderator: Benj
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: internal oscillator issue
Hello,
It looks like the default rate should be 4MHz so your settings look correct.
The problem with your code is there is no delay for when the LED is switched off.
Have you tried a 1 second flasher test?
http://www.matrixtsl.com/wiki/index.php ... ED_flasher
Also warning your config options have Code Protection and Data EE Protection switched on. Probably not what you want when your starting out or developing new code.
It looks like the default rate should be 4MHz so your settings look correct.
The problem with your code is there is no delay for when the LED is switched off.
Have you tried a 1 second flasher test?
http://www.matrixtsl.com/wiki/index.php ... ED_flasher
Also warning your config options have Code Protection and Data EE Protection switched on. Probably not what you want when your starting out or developing new code.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Re: internal oscillator issue
sorun çözüldü Thank youBenj wrote:Hello,
It looks like the default rate should be 4MHz so your settings look correct.
The problem with your code is there is no delay for when the LED is switched off.
Have you tried a 1 second flasher test?
http://www.matrixtsl.com/wiki/index.php ... ED_flasher
Also warning your config options have Code Protection and Data EE Protection switched on. Probably not what you want when your starting out or developing new code.