Can we run bluetooth module hc05 from ECIO-40P by connecting modifying cts and rts pin?
The Rx and Tx features are in flowcode 6 and I have flowcode 5 which shows only CTS and RTS pins in bluetooth component.
bluetooth hc05
Moderator: Benj
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: bluetooth hc05
Hello,
The HC05 will work great with the ECIO40P. Flowcode v5 doesn't show the TX and RX pins but does use them, you can ignore the RTS, CTS pins as the HC module doesn't have flow control.
The TX/RX pins should be C6 and C7 on the ECIO device.
The HC05 will work great with the ECIO40P. Flowcode v5 doesn't show the TX and RX pins but does use them, you can ignore the RTS, CTS pins as the HC module doesn't have flow control.
The TX/RX pins should be C6 and C7 on the ECIO device.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Re: bluetooth hc05
I tried working with it. But it is not working. I am trying flowcode examples provided on the site.