ICD mode

Moderator: Benj

Post Reply
dhjun
Posts: 3
Joined: Mon Feb 09, 2015 2:53 am
Has thanked: 3 times
Contact:

ICD mode

Post by dhjun »

Hello. Could I ask you?
Can I interwork simulation and hardware in flowcode5?
Does simulation and hardware run at the same time?
If they are available, can I use it in ICD mode?
Could you send me the manual of HP299-00-1?
Yours faithfully.

User avatar
Benj
Matrix Staff
Posts: 15312
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4803 times
Been thanked: 4314 times
Contact:

Re: ICD mode

Post by Benj »

Hello,

No the ICD in v5 will not allow the simulation to also run.

Flowcode v6 does not allow this directly but does allow real world communications such as COM ports, MIDI, USB, Ethernet etc to interact with the simulation.

The HP299 datasheet is available from here: http://www.matrixtsl.com/resources/getr ... .php?id=78

Post Reply