Eblock Suggestion - Flexible Level-Shifter

Moderator: Benj

Post Reply
Brendan
Posts: 243
Joined: Tue Nov 27, 2012 12:53 pm
Location: Cambridge, UK
Has thanked: 140 times
Been thanked: 118 times
Contact:

Eblock Suggestion - Flexible Level-Shifter

Post by Brendan »

A great deal of modern peripheral components/devices have 'absolute max' operating voltages and logic levels less than the 5V rail/logic presented by the EB006. The following suggestion assumes this will remain for the foreseeable future.

Speaking from current personal experience, I believe a number of experimenters could benefit from availability of a generic bi-directional level-shifter board - preferably one that connects to the 40-way expansion port (avoiding patch wires by taking VBus to one or more jumper-configurable and/or variable regulators). The board would also present light regulated rails for attached circuits.

One distinct advantage of using the 40-way expansion would be to safely enable/disable the configurable regulator(s) and logic by merely sniffing the switched PIC supply, eliminating potential noise transfers to the PIC supply, and would simply offer the 5x'D' connections (as per the EB006) with level-shifted outputs.

The availability of all ports would also permit some to be configured as open-drain (such as for I2C), and others push-pull driven for higher-speed logic.

Just a thought :wink:


Best wishes for a happy and prosperous new year.

Brendan.

Post Reply