Two issues:
1st is very minor and may not be worth sorting?
1) Built in C code viewer will not let me paste text that’s stored on windows clip board by using Ctrl V keys. OK with right click and paste. So minor it’s not an issue for me, just thought I would mention it for when next updated ( if you feel it even should be corrected?)
2) I am using 4MHz osc. and target device is 16F883. Flowchart will not compile if using any custom setting of baud rate that’s not one of the standard settings
e.g 4900 or 2500
V5.1 Very minor issue + custom RS232 error
Moderator: Benj
-
- Matrix Staff
- Posts: 9521
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
- Contact:
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: V5.1 Very minor issue + custom RS232 error
Hi Martin,
Thanks for the bug spots. Regarding point 2 are you using a software UART? If so then this probably won't work for any non standard Baud rates. Hardware UART should be ok I think.
Thanks for the bug spots. Regarding point 2 are you using a software UART? If so then this probably won't work for any non standard Baud rates. Hardware UART should be ok I think.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Matrix Staff
- Posts: 9521
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
- Contact:
Re: V5.1 Very minor issue + custom RS232 error
Thanks Ben.Benj wrote:Regarding point 2 are you using a software UART? If so then this probably won't work for any non standard Baud rates. Hardware UART should be ok I think.
Oops I should of said it is software, sorry.
I rushed that post bit.
With your user name in blue and your status being Flowcode V5 user, I thought you have left Matrix
Martin