This is cause by a bug in the FC5_PIC_RS232.c file.
If 64bit windows go to C:\Program Files (x86)\Flowcode\v5\Components
or
If 32bit windows go to C:\Program Files\Flowcode\v5\Components
Make a copy of FC5_PIC_RS232.c
then replace original with attached file.
Hopefully flowchart that had the above error will compile successfully.
Martin
Illegal redefinition of symbol: MX_UART_RTS_PORT
Moderator: Benj
-
- Matrix Staff
- Posts: 9521
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
- Contact:
Illegal redefinition of symbol: MX_UART_RTS_PORT
- Attachments
-
- FC5_PIC_RS232.c
- (9.43 KiB) Downloaded 376 times
Martin
Re: Illegal redefinition of symbol: MX_UART_RTS_PORT
It compiled Thank. I haven't tested it on the board yet.
Thanks again for your help.
Ondra
Thanks again for your help.
Ondra
-
- Matrix Staff
- Posts: 9521
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
- Contact:
Re: Illegal redefinition of symbol: MX_UART_RTS_PORT
Your welcome.
Since I have not tested it on hardware. Hopefully it will work.
Thanks for letting us know.
Martin
Since I have not tested it on hardware. Hopefully it will work.
Thanks for letting us know.
Martin
Martin
-
- Posts: 1333
- Joined: Tue Oct 06, 2009 9:39 am
- Has thanked: 1135 times
- Been thanked: 299 times
- Contact:
Re: Illegal redefinition of symbol: MX_UART_RTS_PORT
Hello!
Now I discover again that there is an error or a change. Would not it be a good idea, every time there is a correction and place it in the forum for fix. Or is there something I have misunderstood or overlooked
Best regard
Jorgen.
Now I discover again that there is an error or a change. Would not it be a good idea, every time there is a correction and place it in the forum for fix. Or is there something I have misunderstood or overlooked
Best regard
Jorgen.
-
- Matrix Staff
- Posts: 9521
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
- Contact:
Re: Illegal redefinition of symbol: MX_UART_RTS_PORT
Hi Jorgen,
This error was first reported here:
http://www.matrixmultimedia.com/mmforum ... 65&#p31758
To keep all errors together, so don't have to keep searching, I posted fix in this 'Flowcode V5 Issues' thread along with other fixes.
I also posted a link to here on the thread error was first reported.
I guess its now down to MM from that point.
I thought this way was the way you wanted it to work?
Unless I misread your post?
This error was first reported here:
http://www.matrixmultimedia.com/mmforum ... 65&#p31758
To keep all errors together, so don't have to keep searching, I posted fix in this 'Flowcode V5 Issues' thread along with other fixes.
I also posted a link to here on the thread error was first reported.
I guess its now down to MM from that point.
I thought this way was the way you wanted it to work?
Unless I misread your post?
Martin
-
- Posts: 1333
- Joined: Tue Oct 06, 2009 9:39 am
- Has thanked: 1135 times
- Been thanked: 299 times
- Contact:
Re: Illegal redefinition of symbol: MX_UART_RTS_PORT
Hi Martin!
Yes something like that. I think it would be easier if all the fix´s is in the same place. Or finally MM wil make a total update for V.5
Thank you very much.
Jorgen
Yes something like that. I think it would be easier if all the fix´s is in the same place. Or finally MM wil make a total update for V.5
Thank you very much.
Jorgen
- Steve
- Matrix Staff
- Posts: 3427
- Joined: Tue Jan 03, 2006 3:59 pm
- Has thanked: 114 times
- Been thanked: 422 times
- Contact:
Re: Illegal redefinition of symbol: MX_UART_RTS_PORT
We will be posting a patch soon. In the meantime we will post quick fixes and workarounds here.
Please keep the issues coming in!
Please keep the issues coming in!