i have a problem with connection to pc using rs232
it simulate well in flowcode simulation but with proteus and vb.net 2010 ican recieve data but i cannot send any type of data
i used several program to send data but no thing happend??????????????
what is the problem plz help me
this is my flowcode prog.
http://depositfiles.com/files/yb96s5tks
i have a problem with connection to pc using rs232
Moderator: Benj
Re: i have a problem with connection to pc using rs232
can you or anyone giving us any true exmple for sending data via pc to pic using flowcode and vbasic.net
thanks
thanks
- acestu
- Posts: 1720
- Joined: Thu Dec 01, 2011 9:36 pm
- Location: Macclesfield UK
- Has thanked: 783 times
- Been thanked: 223 times
- Contact:
Re: i have a problem with connection to pc using rs232
Hi,
have you looked at this thread: http://www.matrixmultimedia.com/mmforum ... =26&t=4793
cheers
Acestu
have you looked at this thread: http://www.matrixmultimedia.com/mmforum ... =26&t=4793
cheers
Acestu
Laptop Mac Book Pro i7 retina El Capitan //// Tower/Intel i7-Windows 7 64 Bit, Toshiba i5 Laptop Windows 10
Computers are like air conditioners. They work fine until you start opening windows.
Computers are like air conditioners. They work fine until you start opening windows.
-
- Matrix Staff
- Posts: 9520
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
- Contact:
Re: i have a problem with connection to pc using rs232
Hi attia,
Since you have Flowcode v5 Professional, I will move this to the relevant part of the forum.
Programming Tips & Tricks is NOT for questions or technical support
Please follow this link on instructions on how to register for the v5 forums.
http://www.matrixmultimedia.com/mmforum ... =46&t=9958
Since you have Flowcode v5 Professional, I will move this to the relevant part of the forum.
Programming Tips & Tricks is NOT for questions or technical support
Please follow this link on instructions on how to register for the v5 forums.
http://www.matrixmultimedia.com/mmforum ... =46&t=9958
Martin