Reasign gsm pinout
Moderator: Benj
-
Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Reasign gsm pinout
Hello,
The GSM requires a hardware UART so the pins assigned to this will be specified in the Ext properties window of the GSM component. Refer to the chip diagram for more information regarding the hardware UART pins. The other pins used for the GSM component will be assigned in the Connections window.
The GSM requires a hardware UART so the pins assigned to this will be specified in the Ext properties window of the GSM component. Refer to the chip diagram for more information regarding the hardware UART pins. The other pins used for the GSM component will be assigned in the Connections window.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
Desdewit
- Posts: 130
- Joined: Sat Feb 26, 2011 4:26 am
- Location: South Africa
- Has thanked: 25 times
- Been thanked: 11 times
- Contact:
Re: Reasign gsm pinout
Hi Ben
If I understand correctly then port c 6 & 7 of my pic18f45k22 wil be assigned when I choose hw channel 1 in ext.
Are there any other pins that must be connected except for power, rts & cts?
If I understand correctly then port c 6 & 7 of my pic18f45k22 wil be assigned when I choose hw channel 1 in ext.
Are there any other pins that must be connected except for power, rts & cts?