Bonjour,
Je travail actuellement sur un projet, avec flowcode V5, qui me demande pas mal de mémoire sur mon pic18f4685. Je voudrait rajouté un mémoire en externe sur mon système mais je ne sais pas trop comment pouvoir programmer (peut-on le faire avec flowcode ou existe t-il d'autre programme) ce composant. Quelqu'un pourrait me donner un petit coup de pousse ?
Merci.
Extension memoire PIC18F
Moderator: Benj
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Extension memoire PIC18F
Bonjour,
Une carte SD pourrait être une option , vous pouvez accéder à cette aide du composant FAT . Une autre option peut-être un dispositif SRAM externe tel que la famille 23LC de Microchip qui peut être consulté via l'interface SPI .
Pour plus d'informations sur l'utilisation du protocole SPI en Flowcode pour accéder aux périphériques externes vous pouvez vous référer à ce blog.
http://www.matrixtsl.com/blog/simplifie ... c-and-spi/
Hello,
An SD card might be an option, you can access this using the FAT component. Another option maybe an external SRAM device such as the 23LC family from Microchip which can be accessed via the SPI interface.
For more info on using the SPI protocol in Flowcode to access external devices you can refer to this blog post.
http://www.matrixtsl.com/blog/simplifie ... c-and-spi/
Une carte SD pourrait être une option , vous pouvez accéder à cette aide du composant FAT . Une autre option peut-être un dispositif SRAM externe tel que la famille 23LC de Microchip qui peut être consulté via l'interface SPI .
Pour plus d'informations sur l'utilisation du protocole SPI en Flowcode pour accéder aux périphériques externes vous pouvez vous référer à ce blog.
http://www.matrixtsl.com/blog/simplifie ... c-and-spi/
Hello,
An SD card might be an option, you can access this using the FAT component. Another option maybe an external SRAM device such as the 23LC family from Microchip which can be accessed via the SPI interface.
For more info on using the SPI protocol in Flowcode to access external devices you can refer to this blog post.
http://www.matrixtsl.com/blog/simplifie ... c-and-spi/
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel