Bonjour,
J'utilise le PIC18F1330 qui a 6 Port PWM, mais dans FC4 on ne peut qu’utiliser qu'un PWM!
Comment pouvons-nous utiliser deux 3 PWM dans FC4???
Merci
Christian
PIC18F1330 comment utiliser 3 PWM avec FC4??
Moderator: Benj
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: PIC18F1330 comment utiliser 3 PWM avec FC4??
Bonjour Christian,
Est peu cogné une option PWM pour vous? Si oui, alors vous pouvez trouver un exemple ici.
http://www.matrixmultimedia.com/article.php?a=52
Is bit banged PWM an option for you? If so then you can find an example here.
http://www.matrixmultimedia.com/article.php?a=52
Est peu cogné une option PWM pour vous? Si oui, alors vous pouvez trouver un exemple ici.
http://www.matrixmultimedia.com/article.php?a=52
Is bit banged PWM an option for you? If so then you can find an example here.
http://www.matrixmultimedia.com/article.php?a=52
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
- Dan81
- Valued Contributor
- Posts: 268
- Joined: Sun Jan 15, 2006 4:07 pm
- Location: Albi France
- Been thanked: 60 times
- Contact:
Re: PIC18F1330 comment utiliser 3 PWM avec FC4??
salut Christian
Voila une base de depart avec du code C.
Daniel
Voila une base de depart avec du code C.
Daniel
- Attachments
-
- pwm_1330.fcf
- testé avec Proteus uniquement
- (6.5 KiB) Downloaded 331 times