LCD Display
Posted: Fri Jul 05, 2013 6:40 pm
Hallo zuusammen,
ich muss meinen Projekt folgende Hardware verwenden
- Arduino Mega 2560
- LCD TFT01 Arduino Mega Shield v1.4
- 3.2" TFT LCD Touch Screen
Technische Daten des Displays
The LCD in the TFT01 is 240374PQ . It’s a 65K color , 320*240 (resolution),3.2 inch TFT LCD screen.
The LCD has a wide viewing angle , the contrast is also very suitable. The Screen include a controller SSD1289,
it’s a support 16bit data interface , easy to drive by many MCU like STM32 ,AVR and 8051. The TFT01_3.2 layout a 40 pins interface
for your project , the interface include LCD bus, SD card bus, Touch screen bus and the Flash bus.
Hersteller des Moduls: ElecFreaks
Meine Frage wie muss ich das Display in Flowcode einbinden damit ich es verwenden kann.
Stefan
ich muss meinen Projekt folgende Hardware verwenden
- Arduino Mega 2560
- LCD TFT01 Arduino Mega Shield v1.4
- 3.2" TFT LCD Touch Screen
Technische Daten des Displays
The LCD in the TFT01 is 240374PQ . It’s a 65K color , 320*240 (resolution),3.2 inch TFT LCD screen.
The LCD has a wide viewing angle , the contrast is also very suitable. The Screen include a controller SSD1289,
it’s a support 16bit data interface , easy to drive by many MCU like STM32 ,AVR and 8051. The TFT01_3.2 layout a 40 pins interface
for your project , the interface include LCD bus, SD card bus, Touch screen bus and the Flash bus.
Hersteller des Moduls: ElecFreaks
Meine Frage wie muss ich das Display in Flowcode einbinden damit ich es verwenden kann.
Stefan