Overview of inputs and outputs

Moderator: Benj

Post Reply
ncc1502
Posts: 48
Joined: Mon Apr 07, 2008 9:18 pm
Has thanked: 23 times
Been thanked: 8 times
Contact:

Overview of inputs and outputs

Post by ncc1502 »

In simulation it would be verry handy to have an overview of the state of inputs and outputs.

I think of a picture of the processor with all ports on it and lights on if a input or output is active high and lights off when input or output is active low.

It would be something like a logic analiser in the simulation.

Perhaps with as extra info the value of a port in DEC, HEX of BIN.
Better safe then sorry

User avatar
Benj
Matrix Staff
Posts: 15312
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4803 times
Been thanked: 4314 times
Contact:

Re: Overview of inputs and outputs

Post by Benj »

Hello,

Many thanks for the suggestion. Maybe adding some kind of peripheral usage would also be good i.e. which timers are being used etc.

Post Reply