16F1824 EEPROM issue.

Moderator: Benj

Post Reply
medelec35
Matrix Staff
Posts: 9520
Joined: Sat May 05, 2007 2:27 pm
Location: Northamptonshire, UK
Has thanked: 2585 times
Been thanked: 3815 times
Contact:

16F1824 EEPROM issue.

Post by medelec35 »

If you use EEPROM with 16F1824, then flowchart will fail to compile.
The cause I have traced to some missing definitions in 16F1824.fcd file.
Attached is an updated file which has not been approved by Matrix, so please use at your own risk.
File should be placed in \Matrix Multimedia\Flowcode V4\FCD folder.
For settings to take effect, you must first close Flowcode if still running.

Regards

Martin
Attachments
16F1824.fcd
(10.11 KiB) Downloaded 333 times
Martin

User avatar
Benj
Matrix Staff
Posts: 15312
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4803 times
Been thanked: 4314 times
Contact:

Re: 16F1824 EEPROM issue.

Post by Benj »

Thanks Martin,

I have been through and found the cause of this problem and fixed it for the next update release, many thanks for the spot.

medelec35
Matrix Staff
Posts: 9520
Joined: Sat May 05, 2007 2:27 pm
Location: Northamptonshire, UK
Has thanked: 2585 times
Been thanked: 3815 times
Contact:

Re: 16F1824 EEPROM issue.

Post by medelec35 »

Your welcome Ben,
Would you mind confirming the changes I made are OK and officially people can use the posted file?
EEPROM did appear to work OK, but that’s no guarantee file alterations are 100% correct.

Thanks

Martin
Martin

Post Reply