12F615 missing interrupts: Flowcode v4.5.18.74

Moderator: Benj

Post Reply
medelec35
Matrix Staff
Posts: 9520
Joined: Sat May 05, 2007 2:27 pm
Location: Northamptonshire, UK
Has thanked: 2585 times
Been thanked: 3815 times
Contact:

12F615 missing interrupts: Flowcode v4.5.18.74

Post by medelec35 »

12F615/12F617, Timer1 and Timer2 interrupts are missing from component selection list.
Attached is corrected but untested 12F615.fcd file.
So may or may not work?



Martin
Attachments
12F615.fcd
(10.28 KiB) Downloaded 327 times
Last edited by medelec35 on Fri Aug 12, 2011 4:14 pm, edited 1 time in total.
Martin

medelec35
Matrix Staff
Posts: 9520
Joined: Sat May 05, 2007 2:27 pm
Location: Northamptonshire, UK
Has thanked: 2585 times
Been thanked: 3815 times
Contact:

Re: 12F615 missing interrupts: Flowcode v4.5.18.74

Post by medelec35 »

Same applies to 12F617.

Martin
Attachments
12F617.fcd
(10.46 KiB) Downloaded 337 times
Martin

User avatar
Benj
Matrix Staff
Posts: 15312
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4803 times
Been thanked: 4314 times
Contact:

Re: 12F615 missing interrupts: Flowcode v4.5.18.74

Post by Benj »

Thanks Martin,

I have added these devices to my todo list so I'll give the bits you've added a good test and then once I've confirmed everything is ok I will add them to the master Flowcode file set so that they are included in the next revision.

medelec35
Matrix Staff
Posts: 9520
Joined: Sat May 05, 2007 2:27 pm
Location: Northamptonshire, UK
Has thanked: 2585 times
Been thanked: 3815 times
Contact:

Re: 12F615 missing interrupts: Flowcode v4.5.18.74

Post by medelec35 »

Thanks Ben.
Do you agree with my post?
http://www.matrixmultimedia.com/mmforum ... 723#p26632
?
Martin

User avatar
Benj
Matrix Staff
Posts: 15312
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4803 times
Been thanked: 4314 times
Contact:

Re: 12F615 missing interrupts: Flowcode v4.5.18.74

Post by Benj »

Hi Martin,

Yes I do agree, its probably best to keep the official updates in one place and officially signed off just so we don't get in a muddle about which files should be used etc. I don't mind people posting updates like the FCD updates you made in fact usually it saves me a job and informs me of the problem but as you say updates like this should not really be posted with the official updates. Maybe we make a unofficial updates page to keep all the customer related updated together and this way I have somewhere to go and check that I have done everything before an update release.

Post Reply