Zigbee and Baudrate

Moderator: Benj

Post Reply
Mathy
Posts: 333
Joined: Mon Oct 05, 2009 2:39 pm
Has thanked: 30 times
Been thanked: 33 times
Contact:
Contact Mathy

Zigbee and Baudrate

Post by Mathy »

Hi !

I'm trying Xbee from maxtream with the lastest Flowcode release.

How can I set the baudrate ?

I had a look into your C code component and I think the macro only configure the Xbee module in 9600 bauds with a 19660800 crystal

That's right ?

Thank you :)

Mathy
Top
User avatar
Benj
Matrix Staff
Posts: 15312
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4803 times
Been thanked: 4314 times
Contact:
Contact Benj

Re: Zigbee and Baudrate

Post by Benj »

Hello Mathy

The Zigbee component automatically sets up the baud rate for you at 9600 based on your crystal speed. You just have to connect the XBEE module to the microcontroller UART via a voltage level shifter if you are using a 5V system.
Top
Post Reply

Return to “Flowcode 4 Bugs”