Hi Benj,
I have upgraded to V5 and compiled the same program and it has errors as below i am using pic development board Version 3
it simulated ok but fail to program , it that mean that each time i program a chip i have to go to the c code and make change myself?
i have attached the program it self
thanks in advance
Roger
BoostC Optimizing C Compiler Version 7.04 (for PIC16 architecture)
http://www.sourceboost.com
Copyright(C) 2004-2011 Pavel Baranov
Copyright(C) 2004-2011 David Hobday
Licensed to FlowCode User under Single user Pro License for 1 node(s)
Limitations: PIC12,PIC16 max code size:Unlimited, max RAM banks:Unlimited
error: could not open input file 'C:\PROGRA~2\Flowcode\v5\Tools\boostc\config\PIC10F222.tdf'
ledtest2013V2.c
Starting preprocessor: C:\PROGRA~2\Flowcode\v5\Tools\boostc\pp.exe ledtest2013V2.c -i C:\PROGRA~2\Flowcode\v5\Tools\boostc\include -d _PIC10F222 -la -c2 -o ledtest2013V2.pp -v -d _BOOSTC -d _PIC16 -d _CHAR_INDEX
.
C:\Program Files (x86)\Flowcode\v5\CAL\PIC\PIC_CAL_ADC.c(2682): error: missing right brace
C:\Program Files (x86)\Flowcode\v5\CAL\PIC\PIC_CAL_ADC.c(2674): error: general error
C:\Program Files (x86)\Flowcode\v5\CAL\PIC\PIC_CAL_ADC.c(2674): error: variable name expected
C:\Program Files (x86)\Flowcode\v5\CAL\PIC\PIC_CAL_ADC.c(2674): error: general error
C:\Program Files (x86)\Flowcode\v5\CAL\PIC\PIC_CAL_ADC.c(2674): error: variable name expected
C:\Program Files (x86)\Flowcode\v5\CAL\PIC\PIC_CAL_ADC.c(2674): error: general error
C:\Program Files (x86)\Flowcode\v5\CAL\PIC\PIC_CAL_ADC.c(2674): error: variable name expected
C:\Program Files (x86)\Flowcode\v5\CAL\PIC\PIC_CAL_ADC.c(2674): error: general error
C:\Program Files (x86)\Flowcode\v5\CAL\PIC\PIC_CAL_ADC.c(2674): error: failure
failure
Return code = 1
Flowcode was unable to compile the flowchart's C code due to the following errors:
If your flowchart contains C code, please review this carefully. If your flowchart contains no C-code or you have thoroughly reviewed the code, contact Technical Support.
FINISHED