Hi I would like to know if anyone knows what would be the process, if at all possible, required to build a PIC based module that would communicate to a PCI device. That is, using the PIC device as the Processor controlling the device. I want to control if posible a PCI modem device.
Ondra
Interfacing to, and using PCI devices.
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Hello Ondra
It probably is possible but may take you a long time to work out the high level protocol used by the PCI bus (though I have neve looked into this). It may be far easier to buy an off the shelf modem module designed for embedded use.
It probably is possible but may take you a long time to work out the high level protocol used by the PCI bus (though I have neve looked into this). It may be far easier to buy an off the shelf modem module designed for embedded use.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel