https://www.sparkfun.com/products/465?
I would like to know if this GPS is usable with flowcode, i am looking at it because of the 5 volts supply it needs, about every other one i have seen are 3.3 volts! If anyone have a better option let me know thanx a lot!
Is this GPS would be usable with Flowcode v5?
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Is this GPS would be usable with Flowcode v5?
Hi Speedy,
The module should work fine with Flowcode but be careful the supply voltage is 5V but the output to the micro seems to be at 2.85V.
You could use a buffer IC with open collector style outputs and this way you can convert the signal back to the micro up to 5V by using a pull up resistorto VCC on the buffer output.
The module should work fine with Flowcode but be careful the supply voltage is 5V but the output to the micro seems to be at 2.85V.
You could use a buffer IC with open collector style outputs and this way you can convert the signal back to the micro up to 5V by using a pull up resistorto VCC on the buffer output.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel