I am trying to make a development board which uses an ECIO40P with an LCD display, keypad and some I/O lines.
The ECIO drawings in the documentation are so small that I can't read them properly, is there a bigger drawing?
Also, does anyone have a typical circuit diagram which shows how the ECIO is powered.
ECIO pin-outs larger drawing please
-
- Posts: 3
- Joined: Mon Feb 21, 2011 4:32 pm
- Contact:
- JohnCrow
- Valued Contributor
- Posts: 1367
- Joined: Wed Sep 19, 2007 1:21 pm
- Location: Lincolnshire
- Has thanked: 364 times
- Been thanked: 716 times
- Contact:
Re: ECIO pin-outs larger drawing please
Hi Peter
The EB061 base board for the ECIO data sheet may show you the information you need.
http://www.matrixmultimedia.com/product ... PHPSESSID=
It can also be powered by the USB cable.
The EB061 base board for the ECIO data sheet may show you the information you need.
http://www.matrixmultimedia.com/product ... PHPSESSID=
It can also be powered by the USB cable.
1 in 10 people understand binary, the other one doesn't !
-
- Matrix Staff
- Posts: 9520
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
- Contact:
Re: ECIO pin-outs larger drawing please
Hi Peter,
I do agree the diagram is very small
If you use a pdf reader, then by holding down Ctrl and + then you can zoom in like this: Hope this helps a bit
Martin
I do agree the diagram is very small
If you use a pdf reader, then by holding down Ctrl and + then you can zoom in like this: Hope this helps a bit
Martin
Martin