OkΓ© I'm looking for someone how can explain me how to build myself and LCD of 4x20 on a print and be able to use it on a E-block.
Thanks in advance
Ben
Making a LCD 4x20 on a print????
-
- Posts: 8
- Joined: Wed Nov 25, 2009 11:04 am
- Contact:
Re: Making a LCD 4x20 on a print????
BEST BEN,
I HAVE MADE A 4X20 DISPLAY ON AN EXISTING PRINT OF THE DISPLAY E BLOCKS:
JUST DESOLDER THE TERMINALS OF THE DISPLAY E BLOCK AND PUT A FEMALE PINNING SOCKET ON YOUR E BLOCK BOARD.
THAN JUST BUY AN 4X20 LCD PRINT WITH STANDARD SOCKET AND PUT A MALE PINNING ON IT
THE PROGRAMMING IS JUST THE SAME AS AN 2LINE DISPLAY.THE ONLY DIFFERENCE IS THE STARTING OF THE CURSOR...VERY EASY
SUCCESS
PUTS_JO
I HAVE MADE A 4X20 DISPLAY ON AN EXISTING PRINT OF THE DISPLAY E BLOCKS:
JUST DESOLDER THE TERMINALS OF THE DISPLAY E BLOCK AND PUT A FEMALE PINNING SOCKET ON YOUR E BLOCK BOARD.
THAN JUST BUY AN 4X20 LCD PRINT WITH STANDARD SOCKET AND PUT A MALE PINNING ON IT
THE PROGRAMMING IS JUST THE SAME AS AN 2LINE DISPLAY.THE ONLY DIFFERENCE IS THE STARTING OF THE CURSOR...VERY EASY
SUCCESS
PUTS_JO
- JohnCrow
- Valued Contributor
- Posts: 1367
- Joined: Wed Sep 19, 2007 1:21 pm
- Location: Lincolnshire
- Has thanked: 364 times
- Been thanked: 716 times
- Contact:
Re: Making a LCD 4x20 on a print????
Not exactly a pcb but this is how I built a 4 x 20 LCD
Works fine with flowcode
http://www.matrixmultimedia.com/mmforum ... f=2&t=7940
Works fine with flowcode
http://www.matrixmultimedia.com/mmforum ... f=2&t=7940
1 in 10 people understand binary, the other one doesn't !