Normally on other microcontrollers, options to change pin 1 to input pin or MCLR pin is via Configuration settings.
This option is no available via PPP config.
So how can MCLR be changed in flowcode please?
16F872 & MCLR
Moderator: Benj
-
medelec35
- Matrix Staff
- Posts: 9520
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
- Contact:
-
saschech@gmx.de
- Posts: 714
- Joined: Wed Jan 31, 2007 12:41 pm
- Has thanked: 1 time
- Been thanked: 26 times
- Contact:
Re: 16F872 & MCLR
Hello medelec35
The 16F872 pin 1 is only.......
Regards wolfgang
The 16F872 pin 1 is only.......
Regards wolfgang
- Attachments
-
- mclr.gif (28.69 KiB) Viewed 2329 times
-
medelec35
- Matrix Staff
- Posts: 9520
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
- Contact:
Re: 16F872 & MCLR
Ah yes of course. Pin 1 cannot be used as a standard i/p, that's why option is not there.
Reason why I asked question is reset was not clearing variables, count kept continuing. So I put a o/p high for 5 seconds every time device is reset, which was occurring.
Thanks wolfgang.
Reason why I asked question is reset was not clearing variables, count kept continuing. So I put a o/p high for 5 seconds every time device is reset, which was occurring.
Thanks wolfgang.
Martin