Chip works perfectly in simulation BUT........
Moderator: Benj
-
- Flowcode V4 User
- Posts: 382
- Joined: Tue Nov 01, 2011 4:28 pm
- Has thanked: 196 times
- Been thanked: 26 times
- Contact:
Re: Chip works perfectly in simulation BUT........
This is a bit better!
- Attachments
-
- Scrn capture bit better.jpg
- (455.63 KiB) Downloaded 1684 times
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Chip works perfectly in simulation BUT........
Hello,
first thing to try is rename your project without the spaces and see if that helps. You can probably replace spaces with underscores if that helps.
If this doesn't help then you can try the short path fix detailed here.
http://www.matrixtsl.com/faq/index.php? ... at=1&id=69
first thing to try is rename your project without the spaces and see if that helps. You can probably replace spaces with underscores if that helps.
If this doesn't help then you can try the short path fix detailed here.
http://www.matrixtsl.com/faq/index.php? ... at=1&id=69
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel