Pressure

Post by **greentech** » Mon Jun 17, 2013 7:15 pm

I was looking at the e-blocks page regarding sensors. But i couldn't find anything relating to high pressure sensors.
Is there a way in flow code to measure pressures ranging from 0 - 200 bars?

Post by **Benj** » Mon Jun 17, 2013 7:20 pm

Hello,

Farnell stock a good range of pressure sensors as do Rapid and RS. They can be a bit expensive, Sparkfun may have something useful at a lower cost.

If you can find a part that fits the bill then i'm sure you will be able to use it with Flowcode. Whether it be via an analogue input or some kind of digital interface such as SPI or I2C.

If you find a specific device and would like some more info on how to interface to it then feel free to ask.

dazz · Post by **dazz** » Mon Jun 17, 2013 8:08 pm

Hi
also try aliexpress.com i use it all the time, if you know what sensor you want search for it and try filtering to free shipping

Regards
Dazz

Post by **greentech** » Tue Jun 18, 2013 11:45 am

Benj can u suggest me a part if i want to work with analogue input. Pressure ranges from 0- 30 bars.
regards

Post by **Steve001** » Tue Jun 18, 2013 4:09 pm

Have a look at these they do upto 700Bar

http://www.rayleigh.co.uk/product_details.cfm?ID=TH31

http://www.rayleigh.co.uk/product_details.cfm?ID=TH30

OR

http://www.rayleigh.co.uk/product_resul ... ategory=28

Tell : - 01268 749303
They are very helpfull

Steve

Post by **Steve001** » Tue Jun 18, 2013 9:35 pm

here is a data sheet / product selector chart

sorry couldn't upload full data sheet due to size so had to split it

steve

Post by **greentech** » Wed Jun 19, 2013 11:16 am

THANKS STEVE.

Matrix user forums

Pressure

Pressure

Re: Pressure

Re: Pressure

Re: Pressure

Re: Pressure

Re: Pressure

Re: Pressure