GSM module

For Flowcode users to discuss projects, flowcharts, and any other issues related to Flowcode 4.
To post in this forum you must have a registered copy of Flowcode 4 or higher. To sign up for this forum topic please use the "Online Resources" link in the Flowcode Help Menu.

Moderator: Benj

Post Reply
Dmitry Maximenko
Flowcode V4 User
Posts: 36
Joined: Mon Sep 26, 2011 10:26 pm
Has thanked: 9 times
Been thanked: 2 times
Contact:
Contact Dmitry Maximenko

GSM module

Post by Dmitry Maximenko »

Hi!
Is it possible to use other GSM module than the EB066? There's a lot if you look at the market. If you look on the EB066, it looks to the substantive set some components, possibly a processor that sits on the card that does some work. EB066 is certainly helpful to start with. I saw second modules that are with SIM card or without built in-(GC864PYT730-011; GM862QUD730-009 ..). Will there be much more complicated building programm for such modules? Is there anyone who has tested other modules?
Thank you and Best Regards!
Dmitry
Top
User avatar
Benj
Matrix Staff
Posts: 15312
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4803 times
Been thanked: 4314 times
Contact:
Contact Benj

Re: GSM module

Post by Benj »

Hello,

All GSM modules should work in pretty much the same way and should support the same set of AT commands. You may need to check the Baud rate of the serial connection as Flowcode currently expects 9600bps. A program that works with the EB066 should work with most other GSM modules.
Top
Post Reply

Return to “Flowcode V4”