Hi!
Is it possible to use other GSM module than the EB066? There's a lot if you look at the market. If you look on the EB066, it looks to the substantive set some components, possibly a processor that sits on the card that does some work. EB066 is certainly helpful to start with. I saw second modules that are with SIM card or without built in-(GC864PYT730-011; GM862QUD730-009 ..). Will there be much more complicated building programm for such modules? Is there anyone who has tested other modules?
Thank you and Best Regards!
Dmitry
GSM module
Moderator: Benj
-
- Flowcode V4 User
- Posts: 36
- Joined: Mon Sep 26, 2011 10:26 pm
- Has thanked: 9 times
- Been thanked: 2 times
- Contact:
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: GSM module
Hello,
All GSM modules should work in pretty much the same way and should support the same set of AT commands. You may need to check the Baud rate of the serial connection as Flowcode currently expects 9600bps. A program that works with the EB066 should work with most other GSM modules.
All GSM modules should work in pretty much the same way and should support the same set of AT commands. You may need to check the Baud rate of the serial connection as Flowcode currently expects 9600bps. A program that works with the EB066 should work with most other GSM modules.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel